Audited Supplier
Salt Flaker, Whisker
by Free
by Free
Brake Pads
Ceramic Fiber
Front
ISO/TS16949, BSCI, ISO9001, ISO9002
Disc
Brake Drum
South America, North America, Eastern Europe, Mild East, Southeast Asia, Africa, Northern Europe, Oceania, Southern Europe, Central America, South Asia, Domestic Market
Fibrous Crystal and Scaly Crystal
10-20um and 10-100um
4.0
8-11
<0.5%
0.8 -1.2 G/Cm and 0.2-0.3 G/Cm
Deyoute-Fiber
PP and PE or Newspaper
Whisker, Salt flakes
Hebei, China
2841900090
Product Description
POTASSIUM TITANATE WHISKER
Technical Information Sheet
Potassium Titanate Whisker & Titanate Wafer Crystal
1.General
Potassium titanate whiskers is a new type of composite material, with excellent heat insulation, wear resistance and impact resistance, the material has good friction resistance, is now used in automotive clutch end plate, automotive brake pads and other brake devices and other friction material products, is the ideal material for ceramic friction plate.
2.Chemical Composition:
3. Specification:Potassium titanate whisker; Titanate Wafer Crystal
4. Application:(Potassium titanate whisker)
5. Application:( Titanate Wafer Crystal)
6.Potassium Titanate Whisker & Titanate Wafer Crystal Friction Performance:
(1)The friction coefficient is stable from room temperature to high temperature.
(2)Fully ensure smooth braking
(3)Low wear in the high temperature zone itself
(4)Minimize dual wear
(5)There is almost no noise when braking
7. Packaging:
Using two paper and one plastic composite bag packaging, bag mouth suture seal, 10kg/bag or 25kg/ bag, Can also according to customer requirements.
8.Industrial Safety and Environment Protection
(1)Risk of explosion by static sparks or ignition sources
(2)Use only explosion -proof equipment .
(3)Use with local exhaust ventilation.
(4)Wear protective eyeglasses or chemical safety goggles .
9.A safety data sheet will be made available on request
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Ceramic Pads Materials:
Technical Information Sheet
Potassium Titanate Whisker & Titanate Wafer Crystal
1.General
Potassium titanate whiskers is a new type of composite material, with excellent heat insulation, wear resistance and impact resistance, the material has good friction resistance, is now used in automotive clutch end plate, automotive brake pads and other brake devices and other friction material products, is the ideal material for ceramic friction plate.
2.Chemical Composition:
| CAS | EINECS | CHEMICAL FORMULA | MOLECULAR WEIGHT |
| 12030-97-6 | 234-748-6 | K2O·6TiO2 | 174.06 |
4. Application:(Potassium titanate whisker)
| Potassium Titanate Whisker Friction Parameter | ||
| SEM Appearance | Fibrous Crystal | Visual investigation, SEM |
| Product Appearance | White Powder | Visual investigation |
| Median Size (in volume distribution) | 10-100µm | Laser diffraction method |
| Mohs Hardness | 4.0 | Mohs hardness test method |
| Bulk Density | 0.2~0.3 g/cm | In-house method |
| P H Value | 7-10 | Water leaching (1g / 100g H2O) |
| Moisture Content | <0.5% | Loss on drying test (105ºC×1h) |
5. Application:( Titanate Wafer Crystal)
| Titanate Wafer Crystal Friction Parameter | ||
| SEM Appearance | Scaly Crystal | Visual investigation, SEM |
| Product Appearance | White Powder | Visual investigation |
| Median Size (in volume distribution) | 10-20µm | Laser diffraction method |
| Mohs Hardness | 4.0 | Mohs hardness test method |
| Bulk Density | 0.8 ~ 1.2 g/cm | In-house method |
| P H Value | 8-11 | Water leaching (1g / 100g H2O) |
| Moisture Content | <0.5% | Loss on drying test (105ºC×1h) |
(1)The friction coefficient is stable from room temperature to high temperature.
(2)Fully ensure smooth braking
(3)Low wear in the high temperature zone itself
(4)Minimize dual wear
(5)There is almost no noise when braking
7. Packaging:
Using two paper and one plastic composite bag packaging, bag mouth suture seal, 10kg/bag or 25kg/ bag, Can also according to customer requirements.
8.Industrial Safety and Environment Protection
(1)Risk of explosion by static sparks or ignition sources
(2)Use only explosion -proof equipment .
(3)Use with local exhaust ventilation.
(4)Wear protective eyeglasses or chemical safety goggles .
9.A safety data sheet will be made available on request
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Ceramic Pads Materials:
