Programmable Climatic Cabinet Constant Temperature and Humidity Testing Chamber Climate Simulation Equipment

Programmable Climatic Cabinet Constant Temperature and Humidity Testing Chamber Climate Simulation Equipment
 

Product application:
This product mainly provides a temperature and humidity changing environment for scientific research and production units such as aerospace, aviation, petroleum, chemical industry,automobiles (motorcycles), ships, electronics, communications, etc., for users to inspect the complete machine (or components), electrical appliances, instruments, Temperature and humidity testing of materials is conducted to assess the adaptability of the test product or to evaluate the behavior of the test product. It is an important testing method in the entire process of new product development, prototype testing, and product qualification testing.

Product features:
Control method and features: Balanced Temperature Control System (BTHC) uses P.I.D. method to control SSR, so that the heating and humidifying amount of the system is equal to the heat and humidity loss, so it can be used stably for a long time.
1. The test system has a reasonable structural design, standardized manufacturing process, beautiful and generous appearance.
2. The main functional components of this test chamber adopt brand configurations, with reliable technical principles, low operating noise, and good energy saving effect.
3. The matching and assembly of parts are well matched, and the main functional components are all imported, which improves the safety and reliability of the product and ensures long-term and high-frequency use requirements of users.
4. The equipment has good operability, maintainability, good temperature stability and durability, good safety performance, and does not pollute the environment or harm human health.
Standards:
GB2423[1].02 High temperature test method, GB2423[1].01 Low temperature test method, GB2423[1].03 Constant damp heat test method, GB2423[1].04 Alternating damp heat test method

Meet test method:
GB/T2423.1(IEC60068-2-1) Low temperature test method Ab
GB/T2423.2(IEC60068-2-2) High temperature test method Bb
GJB150.4 Low temperature test
GJB150.3 High temperature test
GB/T2423.3 (IEC60068-2-78) Constant damp heat test method Cab
GB/T2423.4(IEC60068-2-30) Alternating damp heat test method Db
GJB150.9 Damp heat test
(The load per cubic meter is not greater than the heat capacity of 35kg/m3 steel, and there is no active moisture or heat load during the damp heat test)
It complies with the requirements of GB5170, 2, 3, 5, 6-95 "Low temperature, high temperature, constant damp and heat, alternating damp and heat test equipment for basic parameter verification methods of environmental testing equipment for electrical and electronic products".

Specification:
Performance: Refers to the air-cooled type at room temperature 20°C and no load
 

Model		DH-80	DH-100	DH-150	DH-225	DH-408	DH-800	DH-1000
Subdivision models	-20ºC	-20	-20	-20	-20	-20	-20	-20
	-40ºC	-40	-40	-40	-40	-40	-40	-40
	-60ºC	-60	-60	-60	-60	-60	-60	-60
	-70ºC	-70	-70	-70	-70	-70	-70	-70
Volume		80L	100L	150L	225L	408L	800L	1000L
Interior dimension Width*Height*Depth mm		400*500*400	500*500*400	500*600*500	600*750*500	800*850*600	1000*1000*800	1000*1000*1000
Exterior dimension Width*Height*Depth mm		1050*1650*980	1050*1650*980	1050*1750*1080	1150*1900*1080	1350*2000*1150	1550*2150*1350	1550*2150*1550
Power	-20ºC	3.5KW	3.5KW	3.5KW	6KW	6KW	9.5KW	9.5KW
	-40ºC	4.5KW	4.5KW	4.5KW	6.8KW	7KW	12KW	12KW
	-60ºC	5.5KW	5.5KW	5.5KW	8KW	8.5KW	12KW	12KW
	-70ºC	5.5KW	5.5KW	5.5KW	8KW	8.5KW	12KW	12KW
Voltage		220V 50HZ	220V 50HZ	220V 50HZ	380V 50HZ	380V 50HZ	380V 50HZ	380V 50HZ
Temperature range		( )ºC~+150ºC(Low temperature range:0ºC,-20ºC,-40ºC,-60ºC,-70ºC)
Temperature volatility		±0.5ºC
Temperature deviation		≤±2ºC
Heating time		About 4 degrees/min (no-load non-linearity)
Cooling time		About 1 degree/min (no-load non-linearity)
Humidity range		20%~98%R.H.
Humidity volatility		±3%R.H.
Humidity deviation		≤3%
Temperature and humidity Control range

 
Packing and Shipping

About  Company

We, Dongguan Hongtuo Instrument Co., Ltd, a China based company, are pleased to introduce ourselves as a notable testing equipments and machines manufacturer.Our company was established in the year 2000 with two primarily motto, which includes complete client satisfaction and to reach top-most position in the international market. The exceptional quality of our products like Gold Tester,Gold Testing Machine,Density Meter,Universal Tensile Testing Machine,Climatic Chamber,Melt Flow Index Tester,Charpy Impact Testing Machine,Tap Density Tester,Abrasion Tester,Ultrasonic Flaw Detector,Surface Roughness Tester and other Laboratory Testing Equipment, etc. is our company's USP. 

Certification