Audited Supplier
Piston compressor is a kind of piston reciprocating motion to make gas pressurization and gas delivery compressor mainly consists of working chamber, transmission parts, body and auxiliary parts. The working chamber is directly used to compress the gas, the piston is driven by the piston rod in the cylinder for reciprocating motion, the volume of the working chamber on both sides of the piston changes in turn, the volume decreases on one side of the gas due to the pressure increase through the valve discharge, the volume increases on one side due to the reduction of air pressure through the valve to absorb the gas.
Product Description
Ammonia unloading compressor
This series of oil-free lubrication compressors is one of the products produced by our company. The product has the characteristics of low rotation speed, high component strength, stable operation, long service life, and convenient maintenance. Among them, the ZW series compressor is in the form of a unit. It integrates compressor, gas-liquid separator, filter, two-position four-way valve, safety valve, check valve, explosion-proof motor, and chassis. It has the characteristics of small size, lightweight, low noise, good airtightness, easy installation, and simple operation.
This product is mainly used for unloading, loading, refilling, gas recovery, and residual liquid recovery of LPG/C4, propylene, and liquid ammonia. It is widely used in gas, chemical, energy, and other industries, and is the key equipment for gas, chemical, energy, and other industries.
The loading process is opposite to the unloading process.
NO | Model | (Nm3/h) | Inlet pressure (Mpa) | Outlet pressure (Mpa) | Moter POWER (KW) | Dimensions (mm) |
1 | ZW-0.6/16-24 | 550 | 1.6 | 2.4 | 11 | 1000×580×870 |
2 | ZW-0.8/16-24 | 750 | 1.6 | 2.4 | 15 | 1000×580×870 |
3 | ZW-1.0/16-24 | 920 | 1.6 | 2.4 | 18.5 | 1000×580×870 |
4 | ZW-1.5/16-24 | 1380 | 1.6 | 2.4 | 30 | 1000×580×870 |
5 | ZW-2.0/16-24 | 1500 | 1.6 | 2.4 | 37 | 1000×580×870 |
6 | ZW-2.5/16-24 | 1880 | 1.6 | 2.4 | 45 | 1000×580×870 |
7 | ZW-3.0/16-24 | 2250 | 1.6 | 2.4 | 55 | 1000×580×870 |
8 | ZW-0.8/10-16 | 450 | 1.0 | 1.6 | 11 | 1100×740×960 |
9 | ZW-1.1/10-16 | 600 | 1.0 | 1.6 | 15 | 1100×740×960 |
10 | ZW-1.35/10-16 | 750 | 1.0 | 1.6 | 18.5 | 1100×740×960 |
11 | ZW-1.6/10-16 | 950 | 1.0 | 1.6 | 22 | 1400×900×1180 |
12 | ZW-2.0/10-16 | 1200 | 1.0 | 1.6 | 30 | 1400×900×1180 |
13 | ZW-2.5/10-16 | 1500 | 1.0 | 1.6 | 37 | 1400×900×1180 |
14 | ZW-3.0/10-16 | 1800 | 1.0 | 1.6 | 45 | 1400×900×1180 |
15 | ZW-0.6/16-24 | 550 | 1.6 | 2.4 | 11 | 1500×800×1100 |
16 | ZW-0.8/16-24 | 750 | 1.6 | 2.4 | 15 | 1500×800×1100 |
17 | ZW-1.0/16-24 | 920 | 1.6 | 2.4 | 18.5 | 1500×800×1100 |
18 | ZW-1.5/16-24 | 1380 | 1.6 | 2.4 | 30 | 1600×900×1200 |
19 | ZW-2.0/16-24 | 1500 | 1.6 | 2.4 | 37 | 1600×900×1200 |
20 | ZW-2.5/16-24 | 1880 | 1.6 | 2.4 | 45 | 1600×900×1200 |
21 | ZW-3.0/16-24 | 2580 | 1.6 | 2.4 | 55 | 1600×900×1200 |
22 | ZW-3.5/16-24 | 3000 | 1.6 | 2.4 | 55 | 1600×900×1200 |
23 | ZW-4.0/16-24 | 3500 | 1.6 | 2.4 | 75 | 1600×900×1200 |
24 | ZW-0.2/10-25 | 100 | 1 | 2.5 | 5.5 | 1000×580×870 |
25 | ZW-0.4/10-25 | 220 | 1 | 2.5 | 11 | 1000×580×870 |
26 | ZW-0.6/10-25 | 330 | 1 | 2.5 | 15 | 1000×580×870 |
27 | ZW-0.2/25-40 | 260 | 2.5 | 4 | 7.5 | 1000×580×870 |
28 | ZW-0.4/25-40 | 510 | 2.5 | 4 | 15 | 1000×580×870 |
29 | ZW-0.5/25-40 | 660 | 2.5 | 4 | 18.5 | 1000×580×870 |
30 | ZW-0.3/20-30 | 300 | 2 | 3 | 7.5 | 1000×580×870 |
31 | ZW-0.4/20-30 | 420 | 2 | 3 | 11 | 1000×580×870 |
32 | ZW-0.5/20-30 | 540 | 2 | 3 | 15 | 1000×580×870 |
33 | ZW-0.6/20-30 | 630 | 2 | 3 | 15 | 1000×580×870 |
34 | ZW-1.6/20-30 | 1710 | 2 | 3 | 37 | 1400×900×1180 |
Customized is accepted , Pls provide the following information to us ,then we will do the technical proposal and best price to you.
1.Flow rate: _______Nm3/h
2.Gas Media : ______ Hydrogen or Natural Gas or Oxygen or other gas
3.Inlet pressure: ___bar(g)
4.Inlet temperature:_____ºC
5.Outlet pressure:____bar(g)
6.Outlet temperature:____ºC
7.Installation location: _____indoor or outdoor
8.Location ambient temperature: ____ºC
9.Power supply: _V/ _Hz/ _3Ph
10.Cooling method for gas: air cooling or water cooing
Picture display
Customer Display
Company strength display
After Sales Service
1.Quick response within 2 to 8 hours, with a reaction rate exceeding 98%;
2. 24-hour telephone service, please feel free to contact us;
3. The whole machine is guaranteed for one year (excluding pipelines and human factors);
4. Provide consulting service for the service life of the whole machine, and provide 24-hour technical support via email;
5. On-site installation and commissioning by our experienced technicians;
Exhibition Display
Certificate display
Packaging and Shipping
FAQ
1.How to get a prompt quotation of gas compressor ?
1)Flow Rate/Capacity : ___ Nm3/h
2)Suction/ Inlet Pressure : ____ Bar
3)Discharge/Outlet Pressure :____ Bar
4)Gas Medium :_____
5)Voltage and Frequency : ____ V/PH/HZ
2.How long is delivery time ?
Delivery time is around the 30-90 days .
3.What about the voltage of products? Can they be customized?
Yes, the voltage can be customized according to your inquire.
4.Can you accept OEM orders?
Yes, OEM orders is highly welcome.
5.Will you provide some spare parts of the machines?
Yes, we will .
