Audited Supplier
Copper Busbar Processing Machine VHB-301 with Three Functions of Punching,cutting,bending
Bus bar processor machine with three function:punching,cutting,bending.
Motor Voltage:Single phase 50/60HZ,220V
| TECHNICAL DATA | |
| Functions: | With three functions,cutting,punching and bending |
| Dimension of work table: | 600mm(L)×600mm(W)×770mm(H) |
| Voltage:single phase | single phase 50Hz,220V |
| Rating oil pressure: | 700kg/cm2 |
| Cutting force: | 250KN |
| Cutting range: | 150mm(Width)×10mm(thickness) |
| Punching force: | 300KN |
| Distance from hole to sheet side: | 80mm |
| Punching range: | Hole Die.Ф10.5,Ф13.8,Ф17,Ф20.5mm |
Punching Tool CH-70
| Punching Force | 35T |
| Thickness of the sheet | 12mm of sheet |
| Depth of throat | 110mm |
| Accessories | Φ10.5mm,13.8mm,17.5mm,20.5mm |
Cutting Tool CWC-200V
| Cutting Force | 20T |
| Max.Thickness | 12mm of copper sheet/8mm of metal sheet |
| Max.Width | 200mm of copper sheet/100mm of metal sheet |
Bending Tool CB-125D
| Max work pressure | 630Mpa |
| Max Stroke | 200mm |
| Curved row range | copper and aluminum row width 40.50.60.80.100.120mm. |
| Thickness | 4mm-12mm between. |
| Bend angle | D>90 degree angle,arbitrary angle |
| Bend radius | R=row width*2.5 |
| Oil capacity | 600ml |
| Weight | 82kg |
Hydraulic Electric Pump ZCB-700D
| Rated Output | 0.75KW |
| Motor Voltage | 220V |
| Rated Pressure | High 70Mpa,Low 7Mpa |
| Capacity | low pressure 4L/min high pressure 0.6L/min |
| Oil reservoil capacity | 7L |
| Frequency | 50HZ |
| Size | 30*24*40 |
| Pallet | Pallet |
Multi-functional copper busbar processing machine with punching,bending,cutting three functions.
This machine is the light of foreign advanced products, combined with the actual situation in china, in order to improve work efficiency. To save hours of work, while the design and manufacture.
Suitable for transmission and distribution in a large workshop and site work, construction, and power distribution cabinets and switch cabinets, etc. The use of electrical appliances factory.
The machine is equipped with bending, cutting, punching functionality. Optional foot switch or wire switch, easy to operate.
