Audited Supplier
ACF is the activated carbon fibers, the carbon fiber will be some (such as based fiber, PAN-based fiber, viscose-based fiber, pitch-based fibers, etc.) through high temperature activation (activating temperature different activation methods are not the same), it nanometer pore surface, increasing surface area, thereby changing its physical and chemical properties.
Several times higher than granular activated carbon in the air to several times.
In an aqueous solution of 5 to 6 times higher adsorption rate 100 to 1,000 times faster!
1. High specific surface area: Activated carbon fiber mat consists of tiny pores and porous structure, presenting a huge specific surface area. This means it has more adsorption surface and can adsorb gases and dissolved substances efficiently.
2. Excellent adsorption performance: Due to its high specific surface area and pore structure, Activated Carbon Fiber Mat can effectively adsorb harmful gases, odors and pollutants. It removes volatile organic compounds (VOCs), odor, formaldehyde, benzene and other harmful substances from the air, providing a fresh indoor environment.
3. Chemical stability and high temperature stability: activated carbon fiber mat has good chemical stability and can resist corrosion of various chemicals. In addition, it has high-temperature stability and can maintain its adsorption performance and structural stability under high-temperature environment.
4. Low pressure drop and high gas permeability: Activated carbon fiber mats have a low pressure drop, i.e., less resistance to the passage of gases. This makes it more efficient and energy effective in air purification and gas filtration. It is also highly gas permeable, enabling rapid gas transfer and adsorption.
5. Flexibility and plasticity: Activated carbon fiber mat can be made into different shapes and sizes through textile, needle-punching, hot pressing and other processing methods to suit various applications. It can be cut, folded, laminated, etc. and has a certain degree of plasticity.
6. Renewability: activated carbon fiber mat can be regenerated and reused. Through proper treatment and reactivation, it can restore its adsorption performance, extend its service life and reduce resource consumption and environmental impact.
Filament Diameter | μ | 10~20 |
Bulk Density | g/cm3 | 0.04-0.10 |
Loss on Drying | % | 34~35 |
Ignition point | ºC | > 500 |
Areal Weight | m2 /g | 800~1800 |
Pore Volume | ml/g | 0.9-1.28 |
Pore size distribution | 10A°below | 83-84% |
10A°~ 20A° | 6-7% | |
20A°~ 50A° | 6-7% | |
50A°above | 4-5% | |
PH Value | 6.6-7.0 |
For air purification
Can effectively remove the air of harmful odorous substances, especially carcinogens, aromatic compounds (such as benzene, aldehydes) can clean and fresh air.
For sewage treatment
Applicable to the treatment of medicine, mercaptan difficult to decompose organic waste.
Water treatment for food, beverage, medicine
Sugar production in the wine industry decolorization deodorant, drinking water purification, disinfection, tap water to remove other purposes.
Electronic and energy applications
To produce high-capacity capacitor, animal cell electrodes, conductive heating materials.
In terms of special protection
It can be used to do the battlefield rescue gloves, dressings, bandages and anti-chemical warfare screen, and chemical defense troops of chemical protective clothing, bedding can also be used for special medical bedding
