Audited Supplier
♦Lead ingots produced to ASTM B29-03 specifications for refined pure at 99.97% and pure lead at 99.94%
♦Lead ingots that tweak the standard purity specifications to include very low sulfur at controlled levels
Purity specifications like those listed above would be used in radiation shielding applications for interlocking lead bricks or nuclear quality pours as well as extrusion lines that require a very consistent lead quality to achieve reliable repeat values.
♦G2 ballast grade lead ingots that would satisfy the requirements of the end user requiring a "heavy metal" lead ballast weight solution
Material is produced to a 96.5% minimum purity lead level and may contain 1.5-3% Antimony (Sb) and .1-3.5% Tin (Sn)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lead Ingots Application:
Lead Ingots Application:
-lead-acid storage batteries.
-Ammunition, cable sheathing and building construction materials
-Counterweights, bettery clamps
-Cast products such as: bearing, ballast, gaskets, type metal etc.
Common Package:
Waterproof Kraft Paper + Wooden Pallet (each 3 tons) + Bundle with steel strip.
Or Package can also according to your requirements.
The time of delivery:
Within 7-10 days after receipt of advance payment
Cut large coils into small coils or Strip.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.
