Audited Supplier
GB3836
Customized Solenoid
Dason
Carton Packaging
According to the diameter of the pipe size is diff
Dongguan
8505909090
Product Description
Push-pull type pipe explosion-proof solenoid
The product is intended for design the structure of the explosion-proof environment, all product explosion-proof structure using national standard GB3836 asking for this design, including the outlet location, driving position, the reset position.
Principle: 1.
Knot products for low voltage, the product in the slider moves, slider automatically reset after power products.This product is of structure of the push, in addition, the product itself also has a power outage measures, when power outage, push-pull type pipe explosion-proof solenoid slider manual work is still available.
2. The product electrical parameters:
Voltage: can choose between 6-220 - v, generally USES the low voltage direct current (dc).
3. The push-pull type pipe explosion-proof solenoid definition:
Also called tubular electromagnet, tubular solenoid, push refers to product electricity pole and, using the slider bar on the top rod drive objects, pull refers to product electricity slider pull objects.
Its according to the diameter of the pipe size is different, produce power schedule and electrical parameters are different, the smallest pipe diameter on the market at present for our company, the diameter of 6.5 mm, maximum temporarily not qualified.Our biggest done 500 mm in diameter.Because the seal packages, often used in waterproof moisture-proof electronic products or equipment.
4. Choose:
A: identify the push-pull type pipe explosion-proof solenoid to push or pull objects, as mentioned above, a push, the product is electric drive objects, a pull, the product is electricity pull objects.Pull and push, respectively:
Rumsfeld: (heavily silted bar on the right)
Push: (on the right side of the push rod)
B: you do need to push and pull the distance of the object, also is to the distance of the object moving from A to b.
C: determine the strength of moving objects needed, A force to start moving from A place, then move to the end of the B, the whole process needs the biggest force.
D: sure circuit can supply voltage of the electromagnet, dc or ac.
E: determine the current can be load the circuit.
F: identify the electromagnet work time and rest time.
The product is intended for design the structure of the explosion-proof environment, all product explosion-proof structure using national standard GB3836 asking for this design, including the outlet location, driving position, the reset position.
Principle: 1.
Knot products for low voltage, the product in the slider moves, slider automatically reset after power products.This product is of structure of the push, in addition, the product itself also has a power outage measures, when power outage, push-pull type pipe explosion-proof solenoid slider manual work is still available.
2. The product electrical parameters:
Voltage: can choose between 6-220 - v, generally USES the low voltage direct current (dc).
3. The push-pull type pipe explosion-proof solenoid definition:
Also called tubular electromagnet, tubular solenoid, push refers to product electricity pole and, using the slider bar on the top rod drive objects, pull refers to product electricity slider pull objects.
Its according to the diameter of the pipe size is different, produce power schedule and electrical parameters are different, the smallest pipe diameter on the market at present for our company, the diameter of 6.5 mm, maximum temporarily not qualified.Our biggest done 500 mm in diameter.Because the seal packages, often used in waterproof moisture-proof electronic products or equipment.
4. Choose:
A: identify the push-pull type pipe explosion-proof solenoid to push or pull objects, as mentioned above, a push, the product is electric drive objects, a pull, the product is electricity pull objects.Pull and push, respectively:
Rumsfeld: (heavily silted bar on the right)
Push: (on the right side of the push rod)
B: you do need to push and pull the distance of the object, also is to the distance of the object moving from A to b.
C: determine the strength of moving objects needed, A force to start moving from A place, then move to the end of the B, the whole process needs the biggest force.
D: sure circuit can supply voltage of the electromagnet, dc or ac.
E: determine the current can be load the circuit.
F: identify the electromagnet work time and rest time.
