Audited Supplier
QT4-20
Installation and Operation Guidance
3 Years
CE, ISO
Customized
Automatic
Hydraulic Shock
Vibration
Mold Vibration + Table Vibration
22kw
80kn
4t
20 Seconds
Concrete Block Making Machine
Hollow Block, Paving Brick
4-5
Mixing Raw Material ( Cement, Sand, Stone, Water)
Carry Mixed Material From Mixer to Block Machine
Supply Hydraulic Power for Block Machine
Automatically Control Block Machine
Automaticlly Stacking Fresh Block with 3-4 Pallets
Carry Fresh Block to Curing Sites
CYUN
Nude Pack in Full Container
235# steel for machine frame
China
8474802000
Product Description
QT4-20 Automatic Concrete Block Making Machine
Main Advantages of QT4-20 hydraulic cement automatic block making machine
1) Host machine total 5.5T,every part all use thicken plate, make the machine strong and wear-resisting.
2) Fully automatic ,very easy operated by workers, greatly reduce the labor-cost.
3) Japan Mitsubishi PLC control system, ensure the machine runs extremely smoothly, long serving life. Faults-displaying and the troubles-shooting on the cabinet.
4) Hydraulic system, three-stage pressure control valve are adopted. so the pressure for all actions of the machine can be adjusted automatic.
5) Direct chain transmission, to sure very low noise, and easy to check the fault.
6) Mould vibration and head pressure together, make the brick high strength and density.
7) All the mold are carburizing by heat treatment, can using more than 120,000 times.
A : QT4-20 Block machine Technical Paramers
| QT4-20 Automatic hydraulic Block machine | |
| Overall size | 4200(L)×2300(W)×2500(H)mm |
| Hydraulic system | 11KW motor |
| Pallet size | 850×550mm |
| Vibration frequency | 5000 R/Min |
| 360 scatter mixing motor | 1.5KW |
| Vibration motor | 5.5KWx2 |
| Electricity | 380V/220V/ (adjustable) |
B : 8m Conveyor belt technical parameters
| Conveyor belt | |
| Belt width (M) | 0.5 |
| Belt length (M) | 8 |
| Belt speed (M/S) | 2 |
| Power(KW) | 1.1 |
C : JQ1000 Mixer technical parameters
| JQ1000 mixer | |
| Overall size | 2000(L)×2000(W)×1500(H)mm |
| Shaping cycle | 5 mins |
| Volume | 500L (50Kgs Cement) |
| Electricity | 380V/220V/ (adjustable) |
| Total weight | 800KGS |
D :Staker
| Single Row Staker | |
| Size | 2100x1800x2400MM |
| Moving motor | 0.75KW motor |
| Elevating | 0.75KW motor |
FAQ
1.Rich experience:
Factory with 20 years experience. Machines have been well proved for good use.
2.Reliability:
We are reputable and large manufacturers of brick machine with numerous certifications guarantee the quality of our machine. No smuggled goods.
3.Competitive price:
Factory supply directly,not trading company,much competitive price,lower more than30% than other company.
4.Perfect after service:
Engineer overseas door-to door service.24 hours online.All the machine one year warranty,technical support by free.
5. Assured machine quality:
1) Host machine total 5.5T,every part all use thicken plate, make the machine strong and wear-resisting.
2) Fully automatic ,very easy operated by workers, greatly reduce the labor-cost.
3) Japan Mitsubishi PLC control system, ensure the machine runs extremely smoothly, long serving life. Faults-displaying and the troubles-shooting on the cabinet.
4) Hydraulic system, three-stage pressure control valve are adopted. so the pressure for all actions of the machine can be adjusted automatic.
5) Direct chain transmission, to sure very low noise, and easy to check the fault.
6) Mould vibration and head pressure together, make the brick high strength and density.
7) All the mold are carburizing by heat treatment, can using more than 120,000 times.
