Audited Supplier
Electrical specifications at 25º C
Turn ratio (+/-3%): TX and RX = 1CT: 1CT
OCL (100kHz/0.1V at 8mA): 350uh minimum
Ll (100kHz/0.1V): 0.3uh maximum
CWW (100kHz/0.1V): 30pf maximum
DCR (j1 to j2 and j3 to j6): 1.2 ohms maximum
Insertion loss: -1.1dB (0.3 to 100MHz)
Return loss: -18dB (1 to 30MHz), -12dB (30 to 80MHz) minimum
Cross talk: -35dB (1~100MHz)
CMR: -35dB (1~100MHz)
Hi-pot test: 1, 500V RMS/0.5mA/2sec
Operating temperature: 0 to +70º C
Ordering information:
MJKf4511-PA88GXS-l1
MJKF: Modular jack with filter
4511: Series number
PA: PCB type, right angle
88: Number of contact, 8P8C
GX: Contact plating option
GF: Gold flash
GFT: Gold flash on contact, tin plated on solder tail
G15T: 15u-inch gold on contact, tin plated on solder tail
G30T: 30u-inch gold on contact, tin plated on solder tail
G50T: 50u-inch gold on contact, tin plated on solder tail
S: Shielded without panel grounding tab
LED 1: Green
LED 2: Yellow
ANTENK Electronics Co., Ltd was established in 2004. We specialize in producing precise Board to Board,Automotive Connector, Terminal Block Series ,Battery Connector,Din41612 Connector,Round hole row needle, round hole row mother, IC Socket,Battery Holders Series, Male Pin Headers Series,Female Pin Headers Series, Modular Jack RJ45 Series ,D-Subminiature Connectors Series,Box Header Connector, IDC Socket Connector ,SCSI Connectors Series, Power Signal Connector, Wire to Board Connector, Modular Jack, Terminal Block, Wire Harnesses,Cable Assemblies, I/O Connector. Through 15 years of development, we have grown into a leading manufacturer in Asia. We have passed IATF16949:2016, ISO9001:2008 and ISO1400 Certification as well. 
Antenk's connector products are widely used in LCD, digital camera, industrial control, mobile storage, household appliances, network communication equipment, motor, automobile and all kinds of precision instruments etc.
Q1.Are you a manufacturer or trading company?
A: We are a professional manufacturer for all kinds of connetors is in Shenzhen
we have an excellent R&D team with over 10 year-experience.
Q2.What's the lead time after place order?
A: Normally we will deliver your order 10-20 working days after place order.
Q3.What is your sample policy?
A: Free Sample is acceptable (1-20pcs), and customers need to pay the freight cost.
Q4. Do you also test all your products before deliverying?
A: Yes,we usually test them 100% before deliverying.
Q5: What is your payment and shipment?
A: Payment: TT,LC, Western Union,PayPal etc.T/T 30% as deposit and the balance before delivery.
Shipment: We usually use express delivery like DHL, UPS, TNT and FEDEX etc.
