MadeInChina.com > Industrial Equipment & Components > Filtration Equipment & Parts > Filter Membrane

RO Membrane for Reverse Osmosis Membrane Element TM720-400 Equivalent

Price	$325.99 Compare
Min Order	1 Piece
Availability	In Stock
Shipping From	Hubei, China
Popularity	447 people viewed
Quantity	+-

Wuhan Tanal Industrial Co., Ltd.

Audited Supplier 3 years

Profile Certified by SGS/BV

Hubei, China
Darren Wang (Mr.)
International Sales Manager

Visit Homepage Product Catalog

Product Detail
Contact Supplier

Model NO.:

TFBW-8040

Membrane Type:

Spiral

Type:

RO

Series:

Brackish Water

Size:

8040

Membrane Active Area:

37.2 M2

Equivalent:

TM720-400

Membrane Material:

Polyamide Thin-Film Composite

Length:

1016 mm

Diameter:

201 mm

Permeate Tube Inner Diameter:

28.6 mm

Feed Spacer:

28 Mil

Permeate Flow Rate:

10500 Gpd

Stabilized Salt Rejection:

99.6%

Minimum Salt Rejection:

99.4%

Maximum Operating Pressure:

600 Psi

Trademark:

Tanal

Transport Package:

Paper Carton

Specification:

107*20.5*26 cm

Origin:

China

HS Code:

8421999090

Product Description

General Information

TFBW-8040 is manufactured as an equivalent for TM720-400 (TM720400) RO (reverse osmosis) membrane.

TFBW-8040 reverse osmosis membrane elements are developed for brackish water treatment, ideal for reverse osmosis plant managers and operators dealing with brackish water with pre-treatment.

This reverse osmosis membrane element provides consistency, high permeate water quality, high performance and productivity, and long service life.

Features & Advantages

Provides high-quality permeate water
Stable salt rejection rate and high permeate flow rate
Optimized design, good resistance to fouling results in long service life
High chemical tolerance for cleaning with highly effective cleaning performance
Simple and economical element replacement

Applications

Industrial pure water
Industrial wastewater reuse
Slightly contaminated water etc.

Specifications

Configuration: Spiral wound element
Membrane Polymer: Polyamide thin-film composite

Performance

Element Model	Membrane Active Area ft² (m²)	Feed Spacer mil (mm)	Permeate Flow Rate^* GPD (m³/d)	Stabilized Salt Rejection^**	Minimum Salt Rejection
TFBW-8040	400 (37.2)	28 (0.712)	10,500 (39.7)	99.6%	99.4%

Standard test conditions:

The above performance is initial(data record after 30 minutes of operation), based on the following conditions:

2,000 ppm NaCl solution

225 psi (15.5 bar) operating pressure

25°C (77°F) operating temperature

15% permeate recovery

7.5-8 pH range

*Permeate flow for individual elements may vary but will be no more than ±15%.

**Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending on feed water characteristics and operating conditions.

Element Dimensions

Length L inch (mm)	Diameter D inch (mm)	Permeate tube inner diameter d inch (mm)
40 (1,016)	7.9 (201)	1.125 (28.6)

Operating and Cleaning Limits

Maximum Operating Pressure	600 psi (41 bar)
Maximum Operating Temperature	45°C (113°F)
Maximum Chlorine Concentration	0.1 ppm
pH Range, Continuous	2-11
pH Range, Cleaning	1-13
Maximum Feed SDI (15 mins)	5
Maximum Element Pressure Drop	15 psi (1 bar)
Maximum Feed Flow	17 m³/h
Minimum Ratio of Concentrate to Permeate Flow for Each Element	5:1

The limits shown above are for general applications. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane element.

ISO 9001:2015 Quality Management Systems Certificate
TÜV Audit Certificate
Export License

1. Customer-centric company culture
2. Efficient and flexible organizational system
3. 20+ years experience in membrane research, development and manufacturing
4. Better cost-effectiveness

1. Warranty granted.
2. Remote technical training, guidance and support.
3. On-site technical support for training, installation, commissioning, operation and trouble shooting.
4. Free replacement in warranty period.
Feedback Handling Process as below:

Picking up the phone and having the plant manager yelling at you about undelivered membranes and filters?
Your customers are complaining to you about the high costs of existing membranes and filters?
Feel frustrated in prices when you are bidding?

Send your inquiry to us and get a quote for your project now!