Audited Supplier
Order No.: CTH2 485-01S1-EB
Specification: 1*channel RS485 communication extension board, isolation.Apply for CTSC-200 (V5)series CPU(226M,226L,226I,226H);CTH200(V5)series CPU(H226XL,H226XM,H226XC,CTMC series CPU)
Performance Parameters
| Integrated with RSS485 extension communication function description | |||
| RS485 communication | Communication port | 2 communication port: | |
| PORT0:PPI/Free port,standard RS485 | |||
| PORT1:PPI/Free port,standard RS485 | |||
After plugging in the RS485 expansion board and restarting PORT0:RS485,PPI port PORT1:RS485,PPI/Free port FPORT0:Free port | |||
| PPI baud rate(baud) | 9.6k,19.2k and187.5k | ||
| Free port baud rate(baud) | 1.2k ~ 115.2k | ||
| Use isolation repeater | Baud rate is 1000 m at 187.5 and 1200 m at 38.4 K | ||
| No isolation repeater | 50m | ||
| Maximum number of stations | Maximum number of stations is 32 for each segment and 126 for each network | ||
| Maximum number of master stations | 32 | ||
| Point-to-point (PPI master mode) | Yes (NETR/NETW), with a maximum of 8 connections, each connection communicating a maximum of 200 bytes | ||
| MPI connections | 8 MPI connections (1PG/1OP), with 2 reserved | ||
| Isolation | None | ||
Note: After using the RS485 expansion board, the PLC communication port changes as follows:
Original communication port:
Port 0: PPI/ Free port, standard RS485
PORT1: PPI/ Free port, standard RS485
After plugging in the RS485 expansion board and restarting, the communication port changes as follows:
PORT0 (RS485, PPI port)
PORT1 (RS485, PPI/ Free port), Fport0 (free port)
RS485 expansion board communication interfaceModule interface and connector | PIN | FPORT0(RS485) |
Note:when terminal resistors are needed, | 1 | RS485+signal B |
2 | RS485-signalA | |
3 | Terminal resistance | |
4 | Shell Grounded | |
5 | RS485 signal GND | |
6 | NC | |
7 | NC | |
8 | NC | |
9 | NC |
Q1.What's the payment term?
A. We accept TT,LC,Western Union,Paypal.
Q2.What is the delivery time?
A. It depends on order quantity,usually it will take about 3-5 days for sample production.
Q3.What's the package used for?
A. For the small capacity,will use carton,but for big capacity,we should use honeycomb carton and pallet or wooden case for protection.
Q4.Would you accept to use our logo?
A.It's no problem,we accept OEM service.
Q5.What's your production capacity for one month?
A. Our month capacity can reach near 500-3000pcs for the most of our model.
Q6.Where is your market?
A. Our products are popular in Australia,South America,Philippines,Italy, America, Pakistan and so on.Some of them are our regular customers and some of them are developing. We hope you can join us and make mutural benifit from our cooperation.
Q7. What kind of certificates you have?
A. Our company has ISO9001,CE, RoHS,SGS etc.
Logo
Please offer us your own high resolution logo in JPG format,there should be two colors at most in the logo and there should be no gradient effect in the logo.
2. Label
Please offer us your own model numbers.
Lead Time
1.Sample orders will be delivered from our factory within 3-5 working days.
2.General orders will be delivered from our factory within 7-15 working days.
3.Large orders will be delivered from our factory within 45 working days at most.
Shipment
1.By EMS,DHL,FedEx,TNT,UPS or other Express.
2.By our forwarding agent(by Air or by Sea).
3.By your own forwarding agent.
