Audited Supplier
Suspended solids sensors are crucial for monitoring water quality, especially in environments where the concentration of suspended particles can affect ecological health, industrial processes, or water treatment efficiency.
Yosemitech Y512 self-cleaning SS sensor is based on the principle of the infrared scattering method, utilizing the red LED light source and our unique adaptive software algorithm to effectively eliminate external interference. It features a sapphire light guide structure, providing excellent repeatability and stability. This TSS sensor requires no reagents, produces no pollution, and is more cost-effective and environmentally friendly. Additionally, the sensor is equipped with a cleaning brush to remove air bubbles and minimize the impact of contamination on the measurement.
1. Digital sensor, RS485 output, MODBUS protocol
2. Infrared scattered light detection technology with reliable repeatability and stability
3. Sapphire custom optical windows and filters are resistant to ambient light and chromaticity
4. With self-cleaning brush to prevent the attachment of microorganisms and extend the maintenance cycle
5. Built-in calibration parameters for easy on-site use and secondary calibration
| Name | TSS Sensor |
| Model | Y512-A |
| Measurement principle | Scattering method |
| Range | 0.5-4000mg/L(optional 0-15000mg/L) |
| Accuracy | ±5% |
| Resolution | 0.1mg/L |
| Temperature range | 0-50ºC |
| Maximum pressure | 3bar |
| IP range | IP68 |
| Sensor interface | Supports RS-485, MODBUS protocol |
| Power | 0.2W(non wiping)0.6W(wiping);Suggested power supply:DC 9-24V, >500mA |
| Sensor size | Φ36mm*198.2mm |
| Cable length | 10m (default), customizable |
| Calibration | One-point or Two-points Calibration |
| Sensor housing material | Titanium alloy |
