Audited Supplier
HSD
DIN
Plastic
Welding
Chrome
Round
Connecting and Welding Plastic Pipline
EVA
Heat Shrinkable Sleeve
According to Customer's Requirements
HSD
Standard Package
DN110-1000mm
Qingdao China
3917390000
Product Description
Radiation Cross Linked PE Heat Shrinkable Sleeve HSS for pipeline anti corrosion
PE heat shrinkable sleeve is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks, adhesive layer melts, and closely wraps around pipe joints, then it forms together with FBE a firm and continuous anti-corrosion body. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.
Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.
Feature of our heat shrinkable sleeve:
1.Fast shrinkage speed,
2.good waterproof performance,
3 good anti-corrosive performance,
4.long service life, convenient transportation and fast construction.
5.using pure PE material and imported adhesive for ensuring the quality
TECHNICAL PARAMETERS
Application
Heat shrinkable sleeve for Oil & Gas Pipe
Heat shrinkable sleeve forThermo Insulated Pipe
Specification of heat shrinkable sleeve for underground buried steel pipe and insulated pipe
For metal reinforced HDPE corrugated pipe (drainpipe)
Specification of Heat Shrinkable Sleeve for HDPE spiral pipe and metal reinforeced corrugated pipe
Remark: The above is standard size. Production will be according to the buyer's requirements.
OVERSEAS CUSTOMERS
DELIVERY
FACTORY&WORKSHOP
PE heat shrinkable sleeve is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks, adhesive layer melts, and closely wraps around pipe joints, then it forms together with FBE a firm and continuous anti-corrosion body. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.
Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.
Feature of our heat shrinkable sleeve:
1.Fast shrinkage speed,
2.good waterproof performance,
3 good anti-corrosive performance,
4.long service life, convenient transportation and fast construction.
5.using pure PE material and imported adhesive for ensuring the quality
TECHNICAL PARAMETERS
| NO | Text Item | Unit | Performance | Text Result | Text Metho | ||
| Back Material | |||||||
| 1 | Tensile Strengt | MPa | ≥17 | 19.47 | ASTM D638 | ||
| 2 | Elongatio | % | ≥400 | 626 | ASTM D638 | ||
| 3 | Vicat Softening Poin | ºC | ≥90 | 92 | ASTM D1525 | ||
| 4 | Brittleness Temperatur | ºC | <-65 | <-65 | ASTM D2671C | ||
| 5 | Dielectric Strengt | MV/m | ≥25 | 33.13 | ASTM D149 | ||
| 6 | Volume Resistivit | Ω.m | ≥1*1013 | 1.1*1013 | ASTM D257 | ||
| 7 | Environment Stress Crac | h | ≥1000 | >1000 | GB/T1842 | ||
| 8 | Chemical resistance (7d | 10% HCI | Tensile strength | MPa | ≥85 | 104.9 | ASTM D638 |
| Elongation | % | ≥85 | 96.3 | ASTM D638 | |||
| 10% NaAH | Tensile strength | MPa | ≥85 | 102.1 | ASTM D638 | ||
| Elongation | % | ≥85 | 95.6 | ASTM D638 | |||
| 10% NaCL | Tensile strength | MPa | ≥85 | 108.3 | ASTM D638 | ||
| Elongation | % | ≥85 | 94.1 | ASTM D638 | |||
| 9 | Thermal aging (150ºC,168h | Tensile strength | MPa | ≥14 | 20.7 | ASTM D638 | |
| Elongation | % | ≥300 | 630 | ASTM D638 | |||
| NO. | Text Ite | Uni | Performanc | Text Resul | Text Metho | |
| Adhesive | ||||||
| 1 | Softening Poin | ºC | ≥90 | 90.1 | ASTM E28 | |
| 2 | Brittleness Temperatur | ºC | <-15 | <-15 | ASTM D2671C | |
| 3 | Lap Shea | MPa | ≥1.0 | 1.5 | ASTM D1002 | |
| 4 | Peel Strength (23±2ºC | Steel | N/cm | ≥70 | 145.6 | ASTM D1000 |
| Primer | N/cm | ≥70 | 205.9 | ASTM D1000 | ||
| PE laye | N/cm | ≥70 | 190.0 | ASTM D1000 | ||
| Non-solvent Epoxy Primer | ||||||
| 5 | Shear of cured primer | MPa | ≥5.0 | 12 | SY/T0041 | |
Heat shrinkable sleeve for Oil & Gas Pipe
Heat shrinkable sleeve forThermo Insulated Pipe
Specification of heat shrinkable sleeve for underground buried steel pipe and insulated pipe
| No. | Size, mm | Length, mm | Patch | |
| Length, mm | Width, mm | |||
| 1 | Ф159*500 | 670 | Length equals the width of heat shrinkable sleeve | 80 |
| 2 | Ф219*500 | 860 | 100 | |
| 3 | Ф273*500 | 1000 | 100 | |
| 4 | Ф325*500 | 1200 | 100 | |
| 5 | Ф355*500 | 1300 | 100 | |
| 6 | Ф406*500 | 1460 | 120 | |
| 7 | Ф508*500 | 1800 | 120 | |
| 8 | Ф610*500 | 2170 | 120 | |
| 9 | Ф711*500 | 2500 | 150 | |
| 10 | Ф813*500 | 2880 | 150 | |
| 11 | Ф1016*500 | 3480 | 150 | |
| 12 | Ф1219*500 | 4120 | 200 | |
| 13 | Ф1420*500 | 4780 | 200 | |
For metal reinforced HDPE corrugated pipe (drainpipe)
Specification of Heat Shrinkable Sleeve for HDPE spiral pipe and metal reinforeced corrugated pipe
| Pipe Diameter, mm | Length, mm | Width, mm |
| DN300 | 1200 | 300 |
| DN350 | 1430 | 300 |
| DN400 | 1600 | 300 |
| DN450 | 1770 | 300 |
| DN500 | 1900 | 300 |
| DN600 | 2300 | 300 |
| DN700 | 2560 | 300 |
| DN800 | 2900 | 400 |
| DN900 | 3250 | 400 |
| DN1000 | 3600 | 400 |
| DN1200 | 4250 | 400 |
| DN1400 | 4940 | 500 |
| DN1500 | 5290 | 500 |
| DN1600 | 5630 | 500 |
| DN1800 | 6320 | 500 |
| DN2000 | 7010 | 500 |
| DN2200 | 7700 | 500 |
| DN2400 | 8390 | 500 |
Remark: The above is standard size. Production will be according to the buyer's requirements.
OVERSEAS CUSTOMERS
DELIVERY
FACTORY&WORKSHOP
