Audited Supplier
Ral 7035/Ral 7032/ Ral7016 Gray Epoxy Polyester Promid Hybrid Sand Wrinkle/Texture Powder Coating for Metal Cabinet
Colors:
RAL colors,Pantone colors or customer designed colors
Finish:
Smooth
Wrinkle/texture
Sand texturer
Information:
Lead time:5-7 days
FOB port:Qingdao or Nanjing port,China
Tools for powder coating:Electrostatic spray gun & oven
Our market:Europe 60%,North & South America 10%,Fast East 10%,Asia 5%,Africa 15%
Factory introduction:
Factory founded:Year 1993
Factory located:Jinhu,China
Product lines:5
Production Capacity:500tons per month
Export time:From year 2008
Our group own two factories:One is in China,another one is in Ukraine
Quality test appliance for powder coating which we own:
Impact Impact Tester
Thickness Meter
Gloss Meters
Pencil Hardness Tester
Colorimeter
Adhesion tester
Particle Size Analyzer
Horse Boiling Furnace (Test high temperature resistance)
Resistance Tester
Coker
Water Bath Pot
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
PHYSICAL PROPERTIES
- Specific gravity :1.2 ~ 1.5g/cm3 up to colors
- Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
- Level of liquidity:24 ~ 27 mm
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 25 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
Uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
free samples provide for you
You can check our picture of our sample panels as follows,
