Audited Supplier
Raspberry Pi 3 Model B+
The final revision of a third-generation single-board computer
1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and Power-over-Ethernet support (with separate PoE HAT)
Overview
The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.
The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
Specifications
Physical specifications
Warnings:
1. This product should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Raspberry Pi 3 Model B+ shall comply with relevant regulations and standards applicable in the country of intended use.
2. This product should be operated in a well-ventilated environment and, if used inside a case, the case should not be covered.
3. Whilst in use, this product should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
4. The connection of incompatible devices to the GPIO connection may affect compliance, result in damage to the unit, and invalidate the warranty.
5. All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These articles include but are not limited to keyboards, monitors, and mice when used in conjunction with the Raspberry Pi.
6. The cables and connectors of all peripherals
Safety instructions:
1. To avoid malfunction of or damage to this product, please observe the following:
2. Do not expose to water or moisture, or place on a conductive surface whilst in operation.
3. Do not expose to heat from any source; the Raspberry Pi 3 Model B+ is designed for reliable operation at normal ambient temperatures.
4. Do not expose the printed circuit board to high-intensity light sources (e.g. xenon flash or laser) whilst in operation.
5. Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
6. Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimise the risk of electrostatic discharge damage.
