Audited Supplier
100AC
Low Density Polyethylene/LDPE
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Film Pressure
Transparent
Virgin/Recycled
Film
T/T.L/C
25kg/PP Bag
COA
China
3901200090
Product Description
PE information:
1.Production description
Packaging & Delivery
Packaging Detail: 25KG PP BAG, OR 1050 BULK BAG
Delivery Detail: 15 DAYS AFTER RECEIVING YOUR DEPOSIT
Specifications
Chemical Name: High density polyethylene(HDPE)
Formula: [CH2CH2]n
CAS No. 9002-88-4
Appearance: Transparent granules
Hdpe resin, hdpe granules, virgin hdpe resin pipe, hdpe. Plastic Raw Material HDPE resin for HDPE Pipes
2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE100/PE 80
Anti-flame,
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.
1.Production description
Packaging & Delivery
Packaging Detail: 25KG PP BAG, OR 1050 BULK BAG
Delivery Detail: 15 DAYS AFTER RECEIVING YOUR DEPOSIT
Specifications
Chemical Name: High density polyethylene(HDPE)
Formula: [CH2CH2]n
CAS No. 9002-88-4
Appearance: Transparent granules
Hdpe resin, hdpe granules, virgin hdpe resin pipe, hdpe. Plastic Raw Material HDPE resin for HDPE Pipes
2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE100/PE 80
Anti-flame,
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.
| Specification | Blow film grade | ||
| Application | Used for agricultural film, shrink film, transparent film, shopping bags, frozen bags, packaging bags | ||
| Project | Test data | Data unit | |
| Basic properties | Density | 0.9205~0.9245 | g/cm3 |
| Melt flow rate | 1.7-2.3 | g/10min | |
| Mechanical properties | Elongation at break | ≥200 | % |
| Tensile strength at break | ≥17 | Mpa | |
| Tensile strength yield | ≥3.0 | ||
| Shore hardness | ≥44 | ||
| Thermal properties | Vicat softening point | ≥90 | ºC |
