Audited Supplier
The main components of the microporous board is nano silicon dioxide and silicon carbide. It is a new type of heat insulation material obtained after a series of physical and chemical reactions, consisting of silicon dioxide particles with diameters of tens of nanometers, and infrared sunscreens and fibers. The thermal insulation performance of microporous board is lower than that of still air, which can greatly reduce the energy consumption of equipment and reduce the thickness of the required thermal insulation layer.
| Brand Property | TP950 | TP1000 | TP1100 | |
| Melting Point (ºC) | ≥1200 | ≥1200 | ≥1200 | |
| Operating Temperature (ºC) | 950 | 1000 | 1100 | |
| Density (kg/m³) | 280-350 | 550-650 | 550-650 | |
| Compressive strength (MPa) | 0.5 | 0.8-1.2 | 0.8-1.2 | |
| Heating wire shrink 800ºC (%) | ≤1.9 | ≤1.9 | ≤1.9 | |
| Thermal Conductivity (w/m.k) | 200ºC | 0.016 | / | / |
| 400ºC | 0.021 | 0.043 | 0.047 | |
| 600ºC | 0.026 | 0.057 | 0.058 | |
| 800ºC | 0.035 | 0.063 | 0.069 | |
Q1 : How can you control your quality?
A1 : For each production processing, we have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and the quality certificate will be shipped along with goods.
Q2 : What is your lead time?
A2 : It usually needs about 15- 20 days after receiving the PO.
Q3 : Do you provide free samples?
A3 : Yes, free samples are available, generlly speaking, the buyer shall bear all the delivery cost.
Q4 : What is your payments terms?
A4 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit JUCOS company.
Q6 : What standards do you have?
A6 : Our products meet the standards, such as ASTM, ASME, AMS, DIN, JIS etc.
The third party testing is all available for us.
