Audited Supplier
Refrigerator Defrost Heater -Aluminum Foil Heater Element
Features:
1) Type: RLGG
2) Insulation: silicon rubber
Aluminum heater tube is an electric heating component through putting the heating wire into the aluminum tube. It has good waterproof and heat conduction performance. The highest operating temperature can reach 200°C. It is adapted to be operated in the moist occasion with middle and low temperature. Because it can shape easily, it does not equip costly mould, design and product promptly, safe and economical. All the products passed the safe and explosion-proof attestation, and be used widely as the defrosting machines and heaters for the refrigerators and freezers, as well as dry boxes and cookers.
The diameter of aluminum tube is ø4, ø4.5, ø5 and ø6.35.
It is widely used to defrosting and heat preservation for refrigerator and freezer as well as other electrical equipment. It's with rapid speed on heat and with equality, security, through thermostat, power density, insulation material, temperature switch , heat scatter conditions can be required on temperature, mainly for frost elimination in refrigerator, frozen elimination and other power heat appliance.
Technical Data Sheet:
| RLGV | RLGG | |||
| Electrical insulation | 105ºCPVC | Silicon rubber | ||
| Dimension | Any dimension on request | |||
| Voltage | Any voltage on request | |||
| Output | Up to 15W/m | Up to 40W/m | ||
| Tolerances | ≤±5% on resistance | |||
| Insulation resistance in normal temperature | ≥100 MΩ | |||
| Dielectric strength in normal temperature | 1800V 2S, No flashover and break down | |||
| Leakage current in working temperature | ≤0.02 mA/m | |||
| Connect strength | ≥36N 1min | ≥36N 1min | ||
| ≥58.8N 1min | ≥58.8N 1min | |||
Q: Are you a trading company or manufacturer?
A: Yes, we are a manufacturer with factory.
Q: Do you accept OEM service?
A: Yes, please offer your required specifications and drawing.
Q: What's your delivery terms?
A: (1) FOB (2) CFR (3) CIF.
Q: What's your Delivery Time?
A: Normally within 15 days,please confirm with us before order!
Q: What's the Payment Terms?
A: Usually,30% as deposit,70% before shipment by T/T,L/C,D/A,D/P.
Q: How you pack products?
A: Plastic bag inside and exporting carton outside, or according to customers.
Q: What's your available port of Shipment?
A: Shanghai,Ningbo or other ports according to customers' requirement.
Contact us
Louisa
Sales
Jiangyin PaWo Electronics Co., Ltd.
Add: No.98 Qingtong Road, Qingyang Town,
Jiangyin City, Jiangsu Province, China
homepage:http://jypawo.en.made-in-china.com/
Tel: 86-510-86102868
Fax: 86-510-86551425
Moble phone:008615335225310
