Audited Supplier
Item | Unit | CK6150P | CK6150E | CK6163P |
Swing over bed | mm | Φ520 | Φ500 | Φ630 |
Maximum turning diameter on sliding plate | mm | Φ300 | Φ280 | Φ400 |
Distance between centers/maximum machining length | mm | 1000,1500,2000/ 870,1370,1870 | 1000,1500,2000/ 900,1400,1900 | 1000,1500/900,1400 |
Width of bed guide rail | mm | 390 | 425 | 450 |
Maximum travel of transverse X axis/longitudinal Z axis | mm | 260/900,1400,1900 | 290/900,1400,1900 | 330/900,1400 |
X/Z axis rapid feed | m/min | 6/8 | 6/8 | 6/8 |
Spindle speed range | rpm | 45-1800 | ||
Diameter of main spindle taper hole/main spindle through-hole | mm | A2-8/Φ90 1:20/Φ82 | A2-8,Φ90 1:20/Φ85 | A2-8/Φ90 1:20/Φ82 |
Chuck type and specification (Puka/hydraulic) | mm | Φ250/10-inch hollow | Φ250/10-inch hollow | Φ320/10-inch hollow |
Diameter of drawpipe through-hole | mm | Φ60 | Φ60 | Φ60 |
Maximum tool size | mm | 25×25 | 25×25 | 25×25 |
tool carrier |
| Four-position electric tool holder | Vertical 4 stations | Four-position electric tool holder |
Minimum output unit | mm | 0.001 | 0.001 | 0.001 |
Repetitive positioning accuracy X/Z | mm | 0.007/0.008 | 0.007/0.008 | 0.01/0.015 |
Diameter/stroke of tailstock sleeve | mm | Φ75/150 | Φ80/150 | Φ75/165 |
Tailstock sleeve taper hole |
| MT5# | MT5# | MT5# |
Main motor power | kw | 7.5 | 7.5 | 11 |
X and Z axis motor torque | N.m | 6/10 | 6/10 | 10/15 |
Machine size (length × wide × High) | mm | 2700,3200,3700×1600×1700 | 2700,3200-3700×1540×1710 | 2700,3200×1600×1700 |
Machine weight (split bed) | kg | 2500,2800,3200 | 2400,2600,2800 | 3000,3200 |
|
|
|
| |
