Audited Supplier
RT11 Remote Control for Gate Motor Details
This remote control is designed for all the sliding gate openers, swing gate openers, industry door openers, garage door openers and parking barrier gates.
| Model | RT11 |
| Remote Range | >30m |
| Working Frequency | 433.92MHz |
| Inside Battery | 1pc of CR2032 |
It is with four buttons, the four buttons can be used in single or there button mode:
Three button mode remote control: OPEN/CLOSE/STOP of motor are controlled by three buttons separately on the remote control.
Single button mode remote control: OPEN/CLOSE/STOP of motor are controlled by one button circularly on the remote control
The fourth button can be the pedestrian mode.
Q1: How to match your control board? (by PY600ACN for example)
A1: Remote Control Learning:
Remove the motor outer cover and continue to remove the transparent PCB cover, press
the button 'AN1' on the control board, until the 'LED2' indicator light turns on, then release
the button. While the light is on, press the button intended to be paired on the remote
control twice, the 'LED2' indicator light will flash repeatedly and then turn off when remote
control is paired. A maximum 25 remote controls can be paired to one gate opener.
Q2: How to clear all the remote controls? (by PY600ACN for example)
A2: To delete all paired remote controls, press and hold the button 'AN1', when the 'LED2' turns off, all previously paired remote controls will be deleted.
Q3: If my gate opener frequency is 433.92MHz, can the RT11 remote control for gate motor match my device?
A3: The code maybe different, we suggest you can send your device picture or link to us, we can check it for you.
Q4: How to change my battery? Which battery can i replace?
A4: You can find a small hole on the back of the remote control, just use a tool to open the back cover from that hole will be ok. Inside battery model is CR2032.
Our main business is divided into three sectors.
