MadeInChina.com > Industrial Equipment & Components > Valve > Gate Valve

Resilient Seated Gate Valve Flange Type, DN40-300

Price	Negotiable Compare
Min Order	10 Pieces
Availability	In Stock
Shipping From	Shanxi, China
Popularity	460 people viewed
Quantity	+-

SHANXI ARFANTI MECHANICAL AND ELECTRICAL EQUIPMENT CO., LTD.

Audited Supplier 3 years

Profile Certified by SGS/BV

Shanxi, China
Guo Jinhui (Mr.)

Visit Homepage Product Catalog

Product Detail
Contact Supplier

Model NO.:

DN40-300

Media:

Water

Temperature:

0-80

Material:

Cast Iron

Connection Form:

Flange

Pressure:

Pn10/Pn16/Pn25

Actuator:

Manual

Usage:

Flow Control

Standard:

DIN

Application:

Water Industrial Usage

Trademark:

DN40-300

Transport Package:

Case

Origin:

China

HS Code:

84818040

Product Description

RESILIENT SEATED GATE VALVE Flanged type, DN40-300

Connection: Flanged to EN 1092-2, BS4504, ASME B16.10, AS4087
Working pressure: PN10/PN16/PN25
Temperature range: O 'C ~ 80C
Fusion bonded epoxy coating
Completely free and full bore self ciearning & low pressure loss.
Both inside & outside coated with epoxy resin powder.
O-ring bonnet gasket wraps each bolt to prevent corrosion.
Bolts sealed with hot met
Clockwise closing (CWC) as standard.
With rubber dust cover
4 o-rings on stem (total 6 o-rings in bonnet).
The upper 3 o-rings can be replaced online under pressure when valve fully opened.
Thrust washer - Brass material, to get more reliable strength and long service life
Body/bonnet connection

Bonnet gasket fits into a recess in valve bonnet preventing it from being blown out by pressure surges.

Bonnet bolts are in Galvanized carbon steel SS304 upon request
Liner Sealing face - get better sealing & lower closing torque.
Position "A" :

Most factories' design is the same lever to the sealing face, while when the valve closed, the increasing inlet pressure will push the disc shift and press to the valve body, which will cut the disc rubber of position "A" during long term use.
We aware this design defect; and innovate the current deisgn to avoid such hurt, thus enlarge the disc service life.

ITEM	PART NAME	MATERIAL
1	Body	GGG50
2	Disc	EPDM+DI
3	Bonnet Gasket	NBR
4	Stem	SS420
5	Bonnet	GGG50
6	Thrust Washer	Brass
7	Thrust Sleeve	Brass
8	Gland	GGG50
9	Hand wheeel	GGG50
10	Bolts	SS304
11	Washers	SS304
12	Dust Cover	NBR
13	O-Ring	NBR
14	O-Ring	NBR
15	O-Ring	NBR
16	Stem Nut	Brass

Size	Face to face dimension(mm)					No,of turns closing	Flange dimension(EN 1092-2) PN10/PN16/PN25			ASMEB16.1/16.42 CL125/150			AS 4087 PN10/PN16
DN	DIN F4	DIN F5	BS 5163	ASME B16.10	AS 2638	No,of turns closing	D	K	n-d	D	K	n-d	D	K	n-d
DN40/1.5	140	240	178	-	-	9	150	110	4-<P19				-
DN50/2	150	250	178	178	-	9	165	125	4-019	152	120.5	4-019	-	-	-
DN65/2.5	170	270	190	190	-	10	185	145	4-019/4-019/8-0)19	178	139.5	4-019	-	-	-
DN80/3	180	280	203	203	203	12	200	160	8-019	191	152.5	4-019	185	146	4-018
DN100/4	190	300	229	229	229	12	220/220/235	180/180/190	8-019/8-<D19/8-(D23	229	190.5	8-019	215	178	4-018
DN125/5	200	325	254	254	-	14.5	250/250/270	210/210/220	8-0)19/8-0)19/8-0)28	254	216	8-022	-	-	-
DN150/6	210	350	267	267	267	17	285/285/300	240/240/250	8-<P23/8-0)23/8-<P28	279	241.5	8-022	280	235	8-0)18
DN200/8	230	400	292	292	292	18.5	340/340/360	295/295/310	8-023/12-0)23/12-0)28	343	298.5	8-022	335	292	8-018
DN250/10	250	450	330	330	330	23	395/405/425	350/355/370	12-023/12-028/12-(1)31	406	362	12-025	405	356	8-022
DN300/12 ^w	270	500	356	356	356	27	445/460/485	400/410/430	12-023/12-0)28/16-0)31	483	432	12-025	455	406	12-022