Audited Supplier
A212(KSS, KSM, KSL)
Orthopaedics
Thermoplastic Splint
Ethylene Oxide Sterilization
Adult
Without Logo Printing
Klarity
S/M/L
Guangzhou, Guangdong
90211000
Product Description
Resting Pan Mitt Splint is used for fixation after plasty of hand and wrist fracture, nerve tendon injury, cicatricial contracture and so on, prevention or rectification deformation caused by osteoarthropathy and neuromuscular disease.
Resting Pan Mitt Splint comes with:
Precut splints by Klarity is made from low temperature thermoplastic material. The material can be easily softened by placing in 65-70 degree hot water for 3 minutes or less. Thereafter it can be molded direct on patient's body. The splint will harden in 5 minutes or less at room temperature. It's easy for operation and comfortable for patients.
Resting Pan Mitt Splint comes with:
| Item ID | Spec. |
| A212-KSS | 320x180mm |
| A212-KSM | 340x190mm |
| A212-KSL | 360x210mm |
Precut splints by Klarity is made from low temperature thermoplastic material. The material can be easily softened by placing in 65-70 degree hot water for 3 minutes or less. Thereafter it can be molded direct on patient's body. The splint will harden in 5 minutes or less at room temperature. It's easy for operation and comfortable for patients.
