Audited Supplier
N5
Service for Whole Life
12months
Single Faced
up to 20 Colors
Ceramic Anilox Roller
LED, UV, Hotair/IR
Flexo Inks
Flower Head, Flexo
Inline
All Kinds of Labels
Automation or Manual
200m/min
Max 370mm
220mm
360mm
Z = 3.175 mm
Jmetech or Gidue
Wooden Case
from 2color to 20 colors
Xi'an
844316002
Product Description
N5 Flexo machine can meet most of products and reach highest efficiency and lowest waste, highest printing quality and registration. It is extremely flexibility, can combined gravure, silk screen, offset, inkjet, cold foil ,it can also combine inline coating and PUR glue lamination.
1. Super short web path,27" chilling impression cylinder, keep smooth web pass through and constant web temperature.
2. Advanced fully servo technology,
3. Shorter Change over time, Lower waste, highest printing quality and highest production efficiency.
4. Auto pre register, auto register (option) and 2nd pass.
5. Very accuracy tension control, only several N difference.
6. 7colors printing to simulate 90% pantone colors, Advanced in this segment.
7. N5 series Flexo printing machine is your best choice to win your competitors!
Substrate: PS label(Paper, PET, BOPP, PVC), Paper from 30gsm, light carton upto 300gsm, mono film PET from 12um,PVC, BOPP, PE, PA from 20um, laminate tube, PBL and ABL.
Q: Your factory is trading company or factory?
A: We are factory. We have more 5000 square meter workshop and 80 workers ,We accept customized services, research and design.
We are Factory, so we have cost advantage than others
Q: How do your company control the machine quality?
A: First we control the raw materials quality.
Second, we control the quality of machine when we are processing.
Third, Our installment engineer will test machine.
1. Super short web path,27" chilling impression cylinder, keep smooth web pass through and constant web temperature.
2. Advanced fully servo technology,
3. Shorter Change over time, Lower waste, highest printing quality and highest production efficiency.
4. Auto pre register, auto register (option) and 2nd pass.
5. Very accuracy tension control, only several N difference.
6. 7colors printing to simulate 90% pantone colors, Advanced in this segment.
7. N5 series Flexo printing machine is your best choice to win your competitors!
Substrate: PS label(Paper, PET, BOPP, PVC), Paper from 30gsm, light carton upto 300gsm, mono film PET from 12um,PVC, BOPP, PE, PA from 20um, laminate tube, PBL and ABL.
| Substrate Width : | Max 370mm, 430 mm | ||
| Min. Width: | 200, 220 mm | ||
| Printing Width: | Max 360, 420 mm | ||
| Printing Stations: | As request, upto 20colors | ||
| Gear Pitch: | Z = 3.175 mm (Helical 1/8") | ||
| Print Repeat: | Print Cylinder : From 8" to 24" | ||
| Die-Cutting Repeat: | from 72 (9") to 192T (24") - (min. 228,6 mm - max. 609,6 mm) | ||
| Machine Speed | 180 m/min | ||
| Unwinder Reel Diameter: | 1000 mm. (39") - max load 275 Kg | ||
| Rewinder Reel Diameter: | 1000 mm. (39") - max load 275 Kg | ||
| Waste matrix rewinder Diam: | 700 mm (27.5") | ||
| Unwind / Rewind Shaft Diameter: | 3" (76 mm) | ||
| Printable Material | Self Adhesive Stock (paper, PET, BOPP, PVC); Glossy Paper from 30 gsm; Unsupported Film PET from 15µ, others from 20µ; Lamitubes; light cardboard 350 gsm. | ||
| Plate Thickness: | 1,14 mm | ||
| Sticky Back Thickness: | 0,38 mm | ||
| Electrical Voltage: | Req. Voltage (380V standard) ±5%, 3-phases, Neutral, Ground | ||
| Frequency: | Req. Frequency (50Hz standard) ±2%, others are on request | ||
| Electrical Equipment: | According to Chinese Regulations, others are on request | ||
| Colors | Main Structure light grey + white. or on customer request | ||
| Ambient Temperature: | 10° to 25°C | ||
| Directed Humidity | 30% to 80% (at 20°C) | ||
| Altitude | max 2000m above sea level | ||
| Compressed Air | 6 bar pressure non lubricated, dehumidified and filtered air; +2°C dew point , customer prepare this. |
Q: Your factory is trading company or factory?
A: We are factory. We have more 5000 square meter workshop and 80 workers ,We accept customized services, research and design.
We are Factory, so we have cost advantage than others
Q: How do your company control the machine quality?
A: First we control the raw materials quality.
Second, we control the quality of machine when we are processing.
Third, Our installment engineer will test machine.
Q: How about payment term, payment safety and delivery time?
A: We accept 30% deposit, balance before shipment. And Irrevocable L/C at sight.
Delivery time is 20 to 30 days. It is according to order quantity.
Q: What is your company after sale service?
A: Our installment engineers are available. Normally it will take about 7 to 10 days for all.
A: We accept 30% deposit, balance before shipment. And Irrevocable L/C at sight.
Delivery time is 20 to 30 days. It is according to order quantity.
Q: What is your company after sale service?
A: Our installment engineers are available. Normally it will take about 7 to 10 days for all.
Our guarantee is one year. If there is any spare parts is broken, we can send them freely to you.
