Audited Supplier
High Quality NBR Rubber Roller
Factory Direct Supply 
What are NBR and SBR ?
NBR: Nitrile Rubber
-. NBR have good resistance mineral oils, vegetable oils, benzene/petrol, ordinary dilued acids and alkalines. It alsoe can be used in high heat temperature until 120 Celcius. With these reasons, NBR is widely used in variety of industry fields such as the healthcare industry for non-latex gloves, and the automotive parts for O rings. Inthe chamber of paddy dehusker machines, it possibly can reach 90 Celcius during dehusking. Thus, NBR is highly recommended main material for rice rubber roller.
SBR: Styrene Butadiene Rubber.
-. SBR also has many properties as same as NBR. The outstanding properaty of SBR is having good abrasion resistance and good aging stability when protected by additives. SBR is a more general purpose rubber than NBR. For the rice rubber roller, SBR also can be used but does not have heat resistance as good as NBR. Some small to medimum rice mills may choose SBR rice rubber rollers because the cost of SBR normally is lower than NBR rollers.
Products Photos:
We adopt imported reinforcing resin and silica reinforcement, non-pollution, phenol-free formaldehyde, hardness is suitable, super elasticity, tension strength at break, small permanent deformation, strong resistance. One of our grain roller is worth twice as much as an ordinary one. Customers may rest assured to use it.
Qualification:
Tensile strength: cm2 a56.6Mp
Tensile elongation: 240%
Hardness(Shore A): 94-95°
Permanent set: 2%
Akron abrasion: 1.63km/cm3 0.015
Our company also use the homemade SBR materials. We adopt imported reinforcing resin and silica reinforcement, non-pollution, phenol-free formaldehyde, translucent, super elasticity, tension strength at break, strong resistance, hardness is suitable, highly husking percentage, lowly broken rice percentage. Our newly high quality grain roller, you are worth having.
Qualification:
Tensile strength: cm2 42Mpa
Tensile elongation: 260%
Hardness(Shore A) :94-95°
Permanent set: 1.5%
Akron abrasion: 1.63km/cm3 0.05
| Type | Inch | External diameter | Length | Thickness of rubber | |
| Wheel Type | 4" | 222 mm | 100 mm | 19.5 mm | |
| 6" | 222 mm | 152 mm | 19.5 mm | ||
| 8" | 225 mm | 200 mm | 25 mm | ||
| 10" | 255 mm | 254 mm | 24.5mm | ||
| Casing Type | 14" | 227 mm | 355 mm | 29.5 mm | |
| 18" | 232 mm | 457 mm | 30.5 mm | ||
| 20" | 258 mm | 508 mm | 30.5 mm | ||
| 25" | 255 mm | 635mm | 30.5mm | ||
| 28" | 255mm | 710mm | 30.5mm | ||
| Color | White & Brown & Amber | ||||
| Hardness Shore A | 94-95° | ||||
| Tensile Strength | ≥21.0(Mpa) [Superior to international advanced level] | ||||
| Elongation Rate | ≥250% [Superior to international advanced level] | ||||
Packing Details:
Welcome to inquiry us for more details !
