Audited Supplier
LLS3535UVC275SL-25
Top
InGaN
160°
Deep Ultraviolet Light
Non
Ain Ceramic
LG
1W
50000h
RoHS, Reach
1PC
LITEKEY
Tape and Reel
3.5X3.5mm
China
8541401000
Product Description
High Radiant Flux 25mW@100mA 270-280nm UVC LED
1. High radiant flux (@100mA,25mW per PC) and low current with Only 1 PC UVC chip(lower current ,higher radiant flux and long life span)
2. UVC LED with emission wavelength between 270nm to 280nm
2. UVC LED with emission wavelength between 270nm to 280nm
3. Surface Mount type led package:3.5x3.5x1.0mm (LxDxH)
4. High Luminous Intensity ,Low Power Dissipation, good Reliability and Long Life
5. Wide Viewing angle at 160o
6. Environmental Friendly, Reach & RoHS Compliance
1. Typical Optical/Electrical Characteristics (Ta=25ºC)
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test conditions |
| Forward Voltage | VF | 5.5 | -- | 7.5 | V | Ta = 25ºC,100mA |
| Radiant Flux | Φe | 20 | -- | 30 | mW | Ta = 25ºC,100mA |
| Peak Wavelength | λp | 260 | 275 | 280 | nm | Ta = 25ºC,100mA |
| View Angle | 2θ½ | -- | 160 | -- | deg | Ta = 25ºC,100mA |
2. Absolute Maximum Ratings (Ta=25ºC)
| Parameter | Symbol | Value | Unit |
| Power Dissipation | Pd | 1.2 | W |
| Forward Current | IF | 150 | mA |
| Operating temperature range | Topr | -30~+60 | ºC |
| Storage temperature range | Tstg | -40 ~+100 | ºC |
| Surface Temperature | Ts | 50 | ºC |
These UV LEDs is a revolutionary, energy efficient light source for sterilization & disinfection and medical application, with its advantages of lifetime and reliability. You can design freedom, and creating a new opportunities for solid state UVC light source to displace conventional UV technologies(Such as Mercury lamp).
More details of the products,send mail to get the Specification.
- Fluorescent spectroscopy
- Sensors and monitors
- Bio-analysis/detection
- Phototherapy
- Disinfection
Our Services/Why choose Us
1. Professional service: replied within 24 hours(at workdays).
2. Various ready moldings of lamp led are available: no need to afford extra fee for moldings.
3. We also can provide customized products, design according to your demand.
4. Reliable and stable quality: 100% testing for each piece. Automatic testing and bin code selection machine.
5. Experience: produce LED components for more than 14 years.
6. Advanced Equipment: ASM automatic production machines(biggest brand in LED automatic machines)
7. Concentration: We focus on LED research and development, production and sales.
