Audited Supplier
ZLT-CD1
One Year
<500mm
<900kg
Impact Testing Machine
5j
0.5
Mechanical Load
Dynamic Load
Needle
Manual Control
0-100Kg
for Calibrate Spring Impact Hammer
CNAS Calibration Provided
Stainless Steel
1 PC
in 25-30 Days
ZLTJC
in Plywood Carton
IEC60068-2-75
Guangzhou, Guangdong, China
9031809090
Product Description
Spring Hammer Calibration Device:
Model ZLT-CD:
For testing and calibrating spring-operated impact hammer, in accordance with IEC60068-2-75/1997-08 Annex B, Figure B. 1 to B. 4 with scale for impact energies from 0.2J to 1J, 2J.
The principle of this calibration procedure is to compare the energy provided by a spring hammer, which is difficult to measure directly, to the energy of a pendulum, calculated from its mass and height of fall.
Standard Outfit:
1 Pendulum with rigidly clamped spring at the lower end,
1 frame with bearing for the pendulum,
1 scale plate with drag pointer, scale of anodized alumininum,
2 release bases at the frame,
1 base plate with removable release device.
· Impact energy: Max. 2J.
· Pendulum: Steel.
· Diameter pendulum: 20mm.
· Length pendulum 635mm ± 2.5mm.
· Pendulum H: 120mm ± 2mm.
· Pendulum D: 20mm ± 0. 5mm.
· Pendulum W: 4mm ± 0.01mm.
· Release device: AC. Mechanic.
Model ZLT-CD:
For testing and calibrating spring-operated impact hammer, in accordance with IEC60068-2-75/1997-08 Annex B, Figure B. 1 to B. 4 with scale for impact energies from 0.2J to 1J, 2J.
The principle of this calibration procedure is to compare the energy provided by a spring hammer, which is difficult to measure directly, to the energy of a pendulum, calculated from its mass and height of fall.
Standard Outfit:
1 Pendulum with rigidly clamped spring at the lower end,
1 frame with bearing for the pendulum,
1 scale plate with drag pointer, scale of anodized alumininum,
2 release bases at the frame,
1 base plate with removable release device.
· Impact energy: Max. 2J.
· Pendulum: Steel.
· Diameter pendulum: 20mm.
· Length pendulum 635mm ± 2.5mm.
· Pendulum H: 120mm ± 2mm.
· Pendulum D: 20mm ± 0. 5mm.
· Pendulum W: 4mm ± 0.01mm.
· Release device: AC. Mechanic.
| Impact Energy | Max. 2J |
| Pendulum | Steel |
| Diameter Pendulum | 20mm |
| Length Pendulum | 635±2.5mm |
| Pendulum H | 120±2mm |
| Pendulum D | 20mm ±0.5mm |
| Pendulum W | 4mm ±0.01mm |
| Release Device | AC Mechanics |
