Audited Supplier
DTF PET Film Descriptions:
Peel: Warm peel and cold peel
Finish: Matt
Application: wash label, neck label, decoration label, main label, etc
Inks: oil-based ink, water-based ink, plastisol ink, hotmelt glue/adhesive, hotmelt powder
Equipment: automatic printing machine, semi-automatic machine, roll to roll jumbos machine
Apply to: cotton, chemical fiber, cotton-poly blend, non-woven fabrics, leather, poly, etc
How to use DTF PET Film:
1. Print the design
2. After printing, let stand 1-2 minutes (the print results are not clear)
3. Sprinkle the powder onto the printed design. Make sure it is evenly distributed to all sides of the print.
4. Powder can be heated by press machine/oven/flash curing (Setting with oven temperature 125 degrees 5 minutes)
5. After the powder has melted like an orange peel, remove the remaining powder that sticks outside the image area
6. Next, pre-heat the shirt to the temperature of 160 degrees for 10 seconds then let it cool
7. After it cools off, put the PET film DTF on the t-shirt.
8. Press again 15 seconds for finishing, Done
DTF film is also called direct to film, can be used for screen printing on cotton, Polyester, TC, Scuba, and any fibrous material with CMYK-WW Textile Pigment Ink.
The process uses PET DTF transfer film and hot melt polymer powder
PET Film DTF Specs:
| Name | Dtf film Direct to film | Model | SD13-7 |
| Size | 60cm * 100m / 30*100m / A3 | Thick | 75um |
| Ink | CMYK + White pigment ink | Finish | Single site matte |
| Powder | Hot melt powder | Peeling | Warm & cold peeling |
| Transfer time | 10-15s | Transfer temp. | 150-160'c |
DTF film roll Size:
| 1 | 30cm * 100m |
| 2 | 60cm * 100m |
| 3 | Can Be Customized |
Why this DTF FILM?
1. High color fastness, soft hand feeling, good elasticity, and good washing fastness.
2. Resistance to rubbing, hand washing, machine washing does not fade, strong weather resistance.
3. It is resistant to ultraviolet rays and sunlight, and does not fade.
4. Environmentally friendly raw materials, without any discomfort in contact with the skin, and no harm to the skin.
5. It is suitable for making personalized products.
Why us?
1. 16 years manufacturer.
2. 10 years exporting experience.
3. 20+ R&D team
4. DDP service.
1: Can I use an iron?
A: Sure. Both the heat press machine and iron are OK.
2: How can I use this heat transfer film?
A: First, design on software.
Second, print and cut. (Cutting vinyl is only cut)
Third, mirror transfer by PET transfers. (Cutting vinyl doesn't need it) Fourth, heat press (iron) on the garment.
3:How can I get the free sample?
A: Please tell us which model you want and pay the freight, then we will ship out the samples.
4. What machine can I use?
A: Regarding the printable vinyl, you can use a printer and cutter, printer and plotter. Re the cuttable vinyl, you can use the cutter.
5. Can I make my design?
A: Sure, MOQ is 1 roll.
