Audited Supplier
Following is machine introduction
The bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber. The cutter is matched with working track, which makes rubber feeding much more convenient
Following are machine features
1.This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system
2.The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife
3.When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber
4.Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder
Following is technical parameter
| Model | XQL-8 | XQL-16 |
| Max cutting width | 660mm | 1000mm |
| Max cutting stroke | 680mm | 680mm |
| piston diameter | 150mm | 150mm |
| power | 5.5 kw | 5.5 kw |
| machine weight | 1500 kg | 2000 kg |
Applicable rubber sheet specification (TxW) (mm) | (4-12)x600 (900) |
Power supply (V/HZ) | 380/50 |
Compressed air pressure (Mpa) | 0.4-0.8 |
Max. Speed of picking up conveying belt (m/min) | 40 |
Moving speed of hanging rubber rod (m/min) | 0.117-0.75 |
Max. height of hanging sheet (mm) | 1400 |
(KWXPCS) Cooling fan FTA&capacity | final mixing: 0.37x48 master batch: 0.37x60 |
() Swing sheet frequency (adjustable) (m) | 1.3 |
Swing sheet frequency (m/min) | 13 |
() Temperature of rubber sheet (for reference) | 5 Ambient temperature+5° |
Cooling reducer motor | XWD1.1-4-1/29 |
Lift reducer motor | XWD2.2-6-1/35 |
Hanging rod reducer motor | XWD5.5-85-1/595 |
Conveyor reducer motor | XWD3-5-1/23 |
Down swing sheet reducer motor | XWD1.1-5-1/87 |
