Audited Supplier
X(S)N-35L, 55L, 75L, 110L
CE, ISO
New
Customized
General Rubber Machinery
Material Processing Machine
Rubber Regeneration Machinery
Sea King
Wooden Case
ISO9001
Qingdao, China
84778000
Product Description
Dispension Kneader for Rubber and Plastic:
Working Condition
1.Equipment of application:The machine is mainly used for plasticating and mixing of rubber and plastics.
2.The rubber viscosity≤80.
3.Power source:AC380,50Hz;production water pressure for 0.3~0.4MPa,air pressure for 0.6~0.8MPa.
The scope of supply
1.Main machine part 1set
2.Control system 1set
Structure brief
1. Pressure on top materials adopted pneumatic switch.
2.The rotor are adopts two wings shear. working edges parts are adopts alloy surfacing welding, rotor block of working parts for hard chrome plating, the inter rotor through water forced cooling or heating.
3.Mixed chamber adopts clip set of welding structure type, can be through the water for cooling or heating, mixer chamber of working surface adopt hard chrome plating. Mixing bottom with thermocouple temperature measure ,refine in control.
4.The tilting discharging,unloading action by flip motor drives turbine worm provide motivation,electrical automatic control.
5. Reducer gear tooth surface of the hard.
6.Control parts adopts PLC,easy operation,can realize pinch of mixing mill action requires.
Working Condition
1.Equipment of application:The machine is mainly used for plasticating and mixing of rubber and plastics.
2.The rubber viscosity≤80.
3.Power source:AC380,50Hz;production water pressure for 0.3~0.4MPa,air pressure for 0.6~0.8MPa.
The scope of supply
1.Main machine part 1set
2.Control system 1set
Structure brief
1. Pressure on top materials adopted pneumatic switch.
2.The rotor are adopts two wings shear. working edges parts are adopts alloy surfacing welding, rotor block of working parts for hard chrome plating, the inter rotor through water forced cooling or heating.
3.Mixed chamber adopts clip set of welding structure type, can be through the water for cooling or heating, mixer chamber of working surface adopt hard chrome plating. Mixing bottom with thermocouple temperature measure ,refine in control.
4.The tilting discharging,unloading action by flip motor drives turbine worm provide motivation,electrical automatic control.
5. Reducer gear tooth surface of the hard.
6.Control parts adopts PLC,easy operation,can realize pinch of mixing mill action requires.
| Model | X(S)N-10X32 | X(S)N-20X34 | X(S)N-35X30 | X(S)N-55X30 | X(S)N-75X30 | X(S)N-110X30 | ||
| Total volume of mixing chamber | L | 25 | 45 | 75 | 125 | 180 | 250 | |
| Working volume of mixing chamber | L | 10 | 20 | 35 | 55 | 75 | 110 | |
| Driving motor power | KW | 15 | 22 | 55 45 | 75 55 | 110 95 | 185 | |
| Tilting motor power | KW | 1.1 | 1.5 | 2.2 | 2.2 | 4 | 4 | |
| Tilting angle | ° | 140 | 140 | 140 | 140 | 140 | 140 | |
| Rotational speed of the rotor(front/rear) | r/min | 32/23.5 | 34/28 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | |
| Pressure of compressed air | MPa | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.6~0.8 | 0.6~0.8 | 0.6~0.8 | |
| Capacity of compressed air | M3/min | ≥0.5 | ≥0.7 | ≥0.9 | ≥1.0 | ≥1.0 | ≥1.5 | |
| Pressure of cooling water(rubber mixing) | MPa | 0.2~0.4 | 0.2~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | 0.3~0.4 | |
| Pressure of heating steam(plastics mixing) | MPa | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | 0.5~0.8 | |
| | L | mm | 2580 | 2630 | 3200 | 3280 | 3330 | 3930 |
| Overall dimensions | W | mm | 1300 | 1520 | 1900 | 1930 | 2620 | 3000 |
| | H | mm | 2280 | 2550 | 2950 | 3070 | 3340 | 3660 |
| Weight | Kg | 3300 | 4500 | 6500 | 7500 | 10500 | 14500 | |
