Audited Supplier
AS568-932
NBR
Cylinder
Stationary Seal
Sealing
X-Ring
Standard, Nonstandard
59.36 Mm
3 Mm
EDSV/OEM
Polybag+Carton Box
RoHS, REACH, SGS, TUV
China
Product Description
1-Product Name: Rubber NBR /FKM/EPDM Quad Ring/ X-Ring/ X Ring;
2-Material: NBR/HNBR/VITON/PTFE/EPDM/XNBR/SI/CR/AFLAS/FVMQ/FFKM/PU/ECO/NR/SBR/IIR/ACM;
3-Standard: AS568; V.S.P.G.F; C92; French Standard(R); Metric; or to your drawing or samples;
4-Function: X-rings are twin-action 4-lipped seals with an almost square cross-section profile. The X-rings achieves its sealing effect by being installed and compressed within an axial or radial installation housing. Under operating conditions, the pressure of the medium reinforces the sealing function.
5-Applications: X-rings are comparable with the O-ring in their handling and use. For example, they are used for the radial and axial sealing of flanges, sleeves and covers (static application) and for sealing pistons and rod seals, rotating shafts and helical movements (dynamic). X-rings are used primarily for dynamic applications, as they require less pretensioning than O-rings and therefore give rise to less abrasion. They are very often used for quasi-static applications, such as adjustment and swivelling movements. They are also used for modern roller chains, such as motor bike chains, for example.
5-Benefits of using the X-ring (compared with the O-ring):
A high degree of stability for dynamic application, as the X-ring is not susceptible to rolling within the groove (twisting) due to its almost square cross-section.
X-rings require a lower degree of radial pretensioning. This gives rise to less abrasion due to the lower contact pressures in play.
It is possible for a lubricant reservoir to be created between the sealing lips.
Optimised sealing effect due to superior distribution of pressure over the almost square cross-section.
No adverse effect created by the mould-separation ridge as unlike the O-ring, this is not located at the outer diameter but between the actual sealing lips.
Four core reasons you choose EDSV Seal:
A: High Quality Products
B: High Quality Service Team
C: Competitive Pricing
D: Fast Supply System
EDSV -- Specializing in the manufaturing of rubber seal parts in Taiwan.
EDSV -- Manufacturing and selling of rubber O-rings (various country standards), X-rings,Back-up Ring,Bonded Seals,PU Seal, Rubber Ball, Oil Seal, ED Seal (for Fluid Connector), Stepseal, Glyd Ring, High Performance Seal, Washer and other Rubber Parts.
EDSV -- All rubber material imported from overseas covering NBR,HNBR,FKM(VITON),FFKM,SI,EPDM,PU,PTFE,etc.
EDSV -- Having strong technical support to supply custom seal parts for customers.
EDSV -- Taking the production of high quality products, supplying of high standard service, competitive pricing and realizing win-win with customers as objective.
2-Material: NBR/HNBR/VITON/PTFE/EPDM/XNBR/SI/CR/AFLAS/FVMQ/FFKM/PU/ECO/NR/SBR/IIR/ACM;
3-Standard: AS568; V.S.P.G.F; C92; French Standard(R); Metric; or to your drawing or samples;
4-Function: X-rings are twin-action 4-lipped seals with an almost square cross-section profile. The X-rings achieves its sealing effect by being installed and compressed within an axial or radial installation housing. Under operating conditions, the pressure of the medium reinforces the sealing function.
5-Applications: X-rings are comparable with the O-ring in their handling and use. For example, they are used for the radial and axial sealing of flanges, sleeves and covers (static application) and for sealing pistons and rod seals, rotating shafts and helical movements (dynamic). X-rings are used primarily for dynamic applications, as they require less pretensioning than O-rings and therefore give rise to less abrasion. They are very often used for quasi-static applications, such as adjustment and swivelling movements. They are also used for modern roller chains, such as motor bike chains, for example.
5-Benefits of using the X-ring (compared with the O-ring):
A high degree of stability for dynamic application, as the X-ring is not susceptible to rolling within the groove (twisting) due to its almost square cross-section.
X-rings require a lower degree of radial pretensioning. This gives rise to less abrasion due to the lower contact pressures in play.
It is possible for a lubricant reservoir to be created between the sealing lips.
Optimised sealing effect due to superior distribution of pressure over the almost square cross-section.
No adverse effect created by the mould-separation ridge as unlike the O-ring, this is not located at the outer diameter but between the actual sealing lips.
Four core reasons you choose EDSV Seal:
A: High Quality Products
B: High Quality Service Team
C: Competitive Pricing
D: Fast Supply System
EDSV -- Specializing in the manufaturing of rubber seal parts in Taiwan.
EDSV -- Manufacturing and selling of rubber O-rings (various country standards), X-rings,Back-up Ring,Bonded Seals,PU Seal, Rubber Ball, Oil Seal, ED Seal (for Fluid Connector), Stepseal, Glyd Ring, High Performance Seal, Washer and other Rubber Parts.
EDSV -- All rubber material imported from overseas covering NBR,HNBR,FKM(VITON),FFKM,SI,EPDM,PU,PTFE,etc.
EDSV -- Having strong technical support to supply custom seal parts for customers.
EDSV -- Taking the production of high quality products, supplying of high standard service, competitive pricing and realizing win-win with customers as objective.
