Audited Supplier
Various
Various
Various
Three Phase
Available Upon Request
Runh
in Bulk
Shandong Province
Product Description
Runh Power doesn't merely positions itself as a supplier of equipment. The real focus of Runh Power's operation is EPC service (Engineering, Purchase & Construction) of power plant.
During the past decade, Runh Power has been presenting a series of EPC power plant projects in various countries, including India, Pakistan, Guatemala, Ecuador, Ukraine, Vietnam, Rwanda, Ethiopia and Nigeria.
Hundreds of well experienced engineers and technicians of Runh Power grant us specialty in a wide range of power plants. Apart from conventional thermal power plants, Runh Power is also deeply rooted in the construction of power plants operated on renewable energy, such as PV and Biomass energy.
The list below show the range of power plant that Runh Power is willing to undertake.
-Coal-fired power plant
-Gas-fired power plant (Combined recycle power plant)
-Hydraulic powr plant
-Photothermal power plant (the power plant that heats water to steam to propelled turbo-generator unit)
-Photovotaic power plant (where the solar energy is collected from PV panel and transformed to electricity)
-Biomass power plant (where agricultural byproducts such as stalk, straw, wood chip,bagasse are burnt as fuel)
- Municipal Solid Waste power plant (a.k.a MSW power plant, a kind of power plant burning solid waste as fuel)
For commissioning Runh Power a project of power plant, following documents are required for the approval of foreign investment. With at least PPA and Feasibility Report in place, Runh Power is able to help the commissioner to secure private investment or loan from the state bank.
Runh Power is dedicated to provide package service covering from end to end of a construction project of power plant.Services included in an EPC project unfolds in the following order, which also constitutes Runh Power's scope of service.
1.The Argumentation of Project
a. Verification of documents submitted
b. Audition of documents by the authority
c. Signing the contract
2. Engineering Design
a. Selection of a complete set of equipment according to the request or Runh Power's recommandation.
b. Design of overall layout and all the sub-systems within the parameter of power plant.
c. Selection of personnel participating in the project
d. Submission of technical solution to the commissioner for review and approval.
3.Equipment Purchase& Transportation
a.Turbo Generator Set and its auxiliary systems (boiler, condensing water collector, deaerator, high pressure and low pressure superheaters, power distribution system. etc )
b. All the construction material, tools, spare parts and other necessities of the project
4. Civil Construction
a. All the civil construction work within the parameter of power plant
5. Operation & Maintenance
a. Operation of power plant (technical counseling) (Optional)
b.Regular maintenance and inspection (Optional)
c.Technical Training Program for Power Plant Personnel (Optional)
d.General Overhaul (Optional)
6. Installation & Testing
a.Installation & testing for all systems & equipment provided by Runh Power
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
a. Long-term supply of spare parts and other consumibles.(Optional)
Notice: EPS service, which refers to Engineering, Purchase & Supervision of Construction,is also available at your request, in case you prefer local construction contractor to international contractor.
Copy and paste superlinks below to your browser to view more products&services of Runh Power:
Complete catalog of Runh Power's service and products: http://runhpower.en.made-in-china.com/product/DXOEPrMAqpUn/China-The-Catalog-of-Runh-Power-s-Service-Power-Plant-EPC-Contractor.html
Project reference (Lombok Island power plant project in Indonesia): http://runhpower.en.made-in-china.com/product/PKExTkgbmLRJ/China-Reference-Lombok-Power-Station-Project-in-Indonesia-by-Runh-Power.html
Project Reference(51MW coal-firing power plant in Turkey): http://runhpower.en.made-in-china.com/product/pKJQncgjRPRr/China-Reference-51MW-Lignite-Coal-Firing-Power-Plant-in-Turkey.html
Project reference (18MW coal-firing power plant in Pakistan): http://runhpower.en.made-in-china.com/product/pKmJZnRVmzUE/China-Reference-18MW-Coal-Firing-Power-Station-Project-in-Pakistan.html
During the past decade, Runh Power has been presenting a series of EPC power plant projects in various countries, including India, Pakistan, Guatemala, Ecuador, Ukraine, Vietnam, Rwanda, Ethiopia and Nigeria.
Hundreds of well experienced engineers and technicians of Runh Power grant us specialty in a wide range of power plants. Apart from conventional thermal power plants, Runh Power is also deeply rooted in the construction of power plants operated on renewable energy, such as PV and Biomass energy.
The list below show the range of power plant that Runh Power is willing to undertake.
-Coal-fired power plant
-Gas-fired power plant (Combined recycle power plant)
-Hydraulic powr plant
-Photothermal power plant (the power plant that heats water to steam to propelled turbo-generator unit)
-Photovotaic power plant (where the solar energy is collected from PV panel and transformed to electricity)
-Biomass power plant (where agricultural byproducts such as stalk, straw, wood chip,bagasse are burnt as fuel)
- Municipal Solid Waste power plant (a.k.a MSW power plant, a kind of power plant burning solid waste as fuel)
For commissioning Runh Power a project of power plant, following documents are required for the approval of foreign investment. With at least PPA and Feasibility Report in place, Runh Power is able to help the commissioner to secure private investment or loan from the state bank.
-1) Power Purchase Agreement (For independent power producers only)
-2) Feasibility report (In case that there is none, designers and engineers can be dispatched to compile one at the expense of commissioner.)
-3) Sovereign bonds (If sovereign bonds are acquired and the commissioner has 15 % of capital need for the project, Runh Power could start the project while engaging China Export & Credit Insurance Corporation)
-4) Construction Permit (optional)
-5) Fire permit (optional)
-6) Environmental impact assessment (optional)
-7) Land Lease (optional)
-8) Power Generation Power (optional)
-9) Other documents deemed helpful (optional)
-2) Feasibility report (In case that there is none, designers and engineers can be dispatched to compile one at the expense of commissioner.)
-3) Sovereign bonds (If sovereign bonds are acquired and the commissioner has 15 % of capital need for the project, Runh Power could start the project while engaging China Export & Credit Insurance Corporation)
-4) Construction Permit (optional)
-5) Fire permit (optional)
-6) Environmental impact assessment (optional)
-7) Land Lease (optional)
-8) Power Generation Power (optional)
-9) Other documents deemed helpful (optional)
Runh Power is dedicated to provide package service covering from end to end of a construction project of power plant.Services included in an EPC project unfolds in the following order, which also constitutes Runh Power's scope of service.
1.The Argumentation of Project
a. Verification of documents submitted
b. Audition of documents by the authority
c. Signing the contract
2. Engineering Design
a. Selection of a complete set of equipment according to the request or Runh Power's recommandation.
b. Design of overall layout and all the sub-systems within the parameter of power plant.
c. Selection of personnel participating in the project
d. Submission of technical solution to the commissioner for review and approval.
3.Equipment Purchase& Transportation
a.Turbo Generator Set and its auxiliary systems (boiler, condensing water collector, deaerator, high pressure and low pressure superheaters, power distribution system. etc )
b. All the construction material, tools, spare parts and other necessities of the project
4. Civil Construction
a. All the civil construction work within the parameter of power plant
5. Operation & Maintenance
a. Operation of power plant (technical counseling) (Optional)
b.Regular maintenance and inspection (Optional)
c.Technical Training Program for Power Plant Personnel (Optional)
d.General Overhaul (Optional)
6. Installation & Testing
a.Installation & testing for all systems & equipment provided by Runh Power
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
a. Long-term supply of spare parts and other consumibles.(Optional)
Notice: EPS service, which refers to Engineering, Purchase & Supervision of Construction,is also available at your request, in case you prefer local construction contractor to international contractor.
Copy and paste superlinks below to your browser to view more products&services of Runh Power:
Integraed Turbine Island (turbine island refers to a unit of steam turbine-generator set along with all the auxiliary systems): http://runhpower.en.made-in-china.com/product/hbJmEuBKJdfU/China-Integrated-Turbine-Island.html
Complete catalog of Runh Power's service and products: http://runhpower.en.made-in-china.com/product/DXOEPrMAqpUn/China-The-Catalog-of-Runh-Power-s-Service-Power-Plant-EPC-Contractor.html
Project reference (Lombok Island power plant project in Indonesia): http://runhpower.en.made-in-china.com/product/PKExTkgbmLRJ/China-Reference-Lombok-Power-Station-Project-in-Indonesia-by-Runh-Power.html
Project Reference(51MW coal-firing power plant in Turkey): http://runhpower.en.made-in-china.com/product/pKJQncgjRPRr/China-Reference-51MW-Lignite-Coal-Firing-Power-Plant-in-Turkey.html
Project reference (18MW coal-firing power plant in Pakistan): http://runhpower.en.made-in-china.com/product/pKmJZnRVmzUE/China-Reference-18MW-Coal-Firing-Power-Station-Project-in-Pakistan.html
