Audited Supplier
FL-C300
50w
50W 100W 200W Optional
Jpt/Max/Raycus Optional
1.5m-3m, 2-5m
1060nm
1mj, 1.5mj
1-3000kHz
Air Cooling
300*160*450mm, 500*300*650 mm
FORTUNE LASER
Standard Wooden Case
China
8456110090
Product Description
Portable Pulse Laser Rust Removal 50W 100W 200W Fiber Laser Cleaning Machine
Introduction:
FL-C50S/C100S/C200S Laser rust removal equipment is a suitcase-type machine. The outlook is the same as a travel case, which is very easy to take along and move. Also, the best demo machine to fly with you on airplane.
We also approved adding a Phone APP control system.
It can remove the grease, dirt, coating, paint, rust, residue, oxide layer, and other target materials with high efficiency, high performance, low cost and without harm to the base material.
Features:
1. Laser cleaning has no grinding, non-contact, no thermal effect, and is suitable for various materials, etc.
2. Rapid, clean and accurate cleaning;
3. No damage to the substrate;
4. High cleaning precision, strong control ability;
5. Can be used for a long time, low operating costs;
6. Light to carry on the shoulder for outside high position cleaning work;
7. Environmentally friendly, no pollution.
Applications:
Metal workpiece laser de-rusting, degreasing, laser paint removal, laser removal of zinc and film, laser coating removal, widely used in aerospace, mold, microelectronics, construction, nuclear power plants, automobile manufacturing, medical, etc.
What is the difference between a pulsed laser and a continuous laser?
Fiber laser source
(The laser source is divided into continues laser source and pulsed laser source in operation)
Pulsed laser source:
refers to a pulse pf light emitted by a laser source in a pulsed working mode.in short ,it is like the work of a flashlight.When the switch is closed and then immediately turned off,a "light pulse"is send out.Therefore,the pulses are one by one,but the instantaneous power is very high and the duration is very short.It is necessary to work in pulse mode,such as sending signals and reducing heat generation.The laser pulse can be extremely short and has an excellent effect in the field of laser cleaning machines,it does not damage the substrate of the object.The single pulse energy is high,and the effect of removing paint and rust is good.
Continuous laser source:
The laser source continues to provide energy to produce a laser output for a long time.Thus obtaining continuous laser light.Continuous laser output power is generally relatively low.Starting at 1000w.It is suitable for laser metal rust removal.The main feature is that is burns the surface and cannot whiten the surface of the metal.After cleaning the metal,there is a black oxide coating.In addition,it has a good effect for cleaning non-metallic surfaces.
In short:The best way to clean various workpieces (such as paint removal,rust removal,oil removal,etc)is to use a pulsed laser source.
The handle of the case is made of aluminum alloy, which is good in texture, light and durable. The arc design makes it easier to carry it. The mini case is only as big and light as a toolbox.Only 8kg
Laser head, lightweight to carry, easy to operate, output different share laser beam, like wave, circle and square.
Machine Parameters
| Model | RL-C100S | RL-C50S |
| Laser source | Fiber | Fiber |
| Laser Power | 100W | 50W |
| Fiber cable length | 3M | 3M |
| Laser Wavelength | 1064nm | 1064nm |
| Pulse Energy | 1.5 mJ | 1mJ |
| Pulse frequency | 1-4000KHz | 1-1000KHz |
| Scanning speed | 0-7000mm/s | 0-7000mm/s |
| Cooling | Air cooling | Air cooling |
| Dimension | 500*300*650 mm | 300*160*450mm |
| Net Weight | 33KG | 18KG |
| G.W. | 37KG | 21KG |
| Beamwidth | 10-100mm | 10-70mm |
| Optional | Manual | Manual |
| Cleaning Head | Dual / Single Axis | Single Axis |
| Temperature | 5-40 ºC | 5-40 ºC |
| Voltage | Single Phase AC 220V, 50/60HZ | Single Phase AC 220V, 50/60HZ |
| Laser cleaning | chemical cleaning | Mechanical grinding | dry ice cleaning | Ultrasonic cleaning | |
| Cleaning method | Laser,non-contact | Chemical cleaning agent, contact type | sandpaper, contact | Dry ice, non-contact | Cleaning agent, contact type |
| Workpiece damage | no | yes | yes | no | no |
| Cleaning efficiency | High | low | low | medium | medium |
| Consumables | Only electricity | Chemical cleaning agent | sandpaper, grinding wheel | dry ice | Special cleaning agent |
| cleaning effect | spotlessness | general, uneven | general, uneven | excellent, uneven | Excellent, small range |
| Safety/environmental protection | No pollution | polluted | polluted | No pollution | No pollution |
| manual operation | Simple operation, handheld or automated | The process flow is complex, and the requirements for operators are high | Labor-intensive, protective measures are required | Simple operation, handheld or automated | Simple operation, need to manually add consumables |
| cost input | High initial investment cost, no consumables, low maintenance cost | Low initial investment and high cost of consumables | High initial investment and low cost of consumables | The initial investment is medium, and the cost of consumables is high | Low initial investment and high cost of consumables |
