Audited Supplier
GY-569
One Year
One Year
Diamond
Liquid Filtration, Screening, Gas-Liquid Separation, Gas Filtration
Medium Efficiency
Filter Disk
None or Ruthenium-Iridium
0.3X0.6 0.5X1 0.6X1.2 1X2 1.5X3 2X2.5 2X4 3X6
0.04mm-2mm
Low Density, High Strength, Low Elastic Modulus
Customized According to Customer Requirement
Machine Stamping and Stretching
Wooden Box
Titanium Gr.1
GaoYuan
Wooden Box
0.5mm 2x4mm Aperture
Hebei, China
8108909000
Product Description
Titanium Mesh Anode, PEM Electrolytic Cell Anode Micro Titanium Mesh, Electrolytic Water Titanium Mesh, Ruthenium-Iridium Coated Titanium mesh, Expanded Titanium Metal Mesh, Electrolytic Hydrogen Production Titanium Anode Expanded Plate, Titanium Anode Mesh Electrolytic Cell, Titanium Electrode In titanium Anode Mesh,Platinized Titanium Anode Shate.
Application: electroplating electrode electrolysis hydrogen production, small hydrogen production machine, electrolytic cell
Raw material & Grade: Titanium plate TA1 TA2, mainly Ti Gr.1
Common thickness: 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm
Typical mesh size (long intercept * short intercept) : 12.5*6.5mm, 12.5*4.5mm, 10*5mm, 8*4mm, 6*3mm, 4*2mm, 2*1mm, 1.5*0.8mm, etc. Special mesh can be customized according to requirements.
Common mesh width: 1250mm, 1500mm All can be cut into small pieces of different sizes
Production process: tensile expansion, made of titanium plate or titanium foil by stamping and drawing, mesh hole for diamond hole.
Packing: waterproof paper+wooden box
Titanium plate tensile mesh advantages: acid and alkali resistance, high temperature resistance, long service life, low replacement cost
| Thickness (mm) | SWD (mm) | LWD (mm) | Strand (mm) | Sheet Width (mm) |
| 0.3-0.5 | 2-2.5 | 3-5 | 0.3-2.0 | 500-1250 |
| 0.3-0.7 | 3-4 | 6-8 | 0.3-2.0 | 500-1250 |
| 0.3-0.8 | 5-6 | 10-12.5 | 0.3-2.0 | 500-1250 |
| 0.3-0.9 | 7-8 | 12.5 | 0.3-2.0 | 500-1250 |
| 0.3-1.0 | 8-10 | 16-20 | 0.3-2.0 | 500-1500 |
| 0.4-1.5 | 10-12 | 25-30 | 0.4-2.0 | 500-1500 |
| 0.5-3.0 | 15-16 | 30-38 | 0.6-4.0 | 500-1500 |
| 0.7-4.0 | 18-22 | 50-57 | 0.7-6.0 | 500-2500 |
| 1.0-5.0 | 22-25 | 60-75 | 1.0-6.0 | 500-2500 |
| 2.0-7.0 | 30-38 | 75-100 | 2.0-6.0 | 500-2500 |
Titanium is the best alternative to lead anodes
Titanium Mesh Anodes are low energy mesh materials to replace conventional cast or cold rolled lead anodes. Fit for new and already established EW operations, the titanium metal substrate with a fully amorphous coating offers a considerable cut down in cell voltage as compared to the standard lead anodes or crystalline coated titanium anodes. Even it also avoids the precipitation of unwanted contaminants like manganese and lead oxides.
The lead anodes pose a challenge for EW operations in handling and disposing of lead waste. The cells need to be cleaned by operators to eradicate lead sludge accumulation that can be risky to health and safety of an operator. Unlikely, the titanium anodes avoid this need.
Additionally, the titanium anodes do not need to be stabilized by adding cobalt sulfate to the electrolyte. Preventing cobalt from EW process decreases the operation cost and with titanium anodes there is no need to electrically separate the cells that increases the plant availability and productivity.
Titanium mesh has two types: the mesh made by weaving titanium wire and mesh by expanding titanium sheet.
Titanium Sintered Fiber Felt
Titanium Foam Sheet with Ruthenium-iridium layer
