Specifications:
- HEADER SIZE: 4.2 m
- TYPICAL HEIGHT: 2m
- TYPICAL WIDTH: Single Side: 2m to 2.3m, Bi-Part: (4m to 4.6m)
- TYPICAL DOOR PANEL WEIGHT: up to each 5000kg
- DRIVE SYSTEM: Brushless DC motor, gear drive, toothed belt
- CONTROLLER: microprocessor based, safety logic, watchdog LED
- SENSORS: 2 for motion (switchable between uni-directional and bidirectional) and 1 Stan-Guard® and doorway holding beam for safety. wallplates, radio control optional.
- POWER REQUIRED: 250W, 5 amps.
CODE COMPLIANCE: SGS,ISO900 Door packages are custom manufactured to fit your job requirements. For sizes greater or smaller then typical, contact your authorized
H-30 Automatic Industrial door operator | ||
OPEN WAY | SINGLE SIDE SLIDING | DOUBLE SIDES SLIDING |
TYPE | S-80 | S-80S |
DOOR WEIGHT | 5000Kg×1(door) | 4000Kg×2(door) |
DOOR WIDTH | Dw=1000mm~10000mm | Dw=1000mm-20000mm |
INSTALL WAY | Surface install | Surface install |
MOTOR | DC24V BRUSHLESS DC MOTOR | |
MICRO-CONTROLLER | Standard Micro-controller | |
POWER CONSUMPTION | 250W | |
VOLTAGE | AC80~250V (regulable ) | |
ENVIRONMENTAL TEMPERATURE | -20°C to +50°C | |
VOLUME | 60 decibels (max) | |
STARTING SPEED | 200mm/(second) to 400mm/(second) | |
STARTING TIMES | 0.5-20 sec (regulable) | |
TRANSMISSION IMPORTANT CONDITION | RACK CHAIN | |
OPENING DOOR RANGE | FULL/HALF-OPEN (regulable ) | |
PFC POWER EFFICIENCY | 0.95(in AC 100V Full load) |

Accessories List

Brushless DC Motor 250W

Micr-Controller :

Stainless steel hanger wheels :

Chain transmission

Original BEA SENSOR (MW8)

Belt Roller

Lock

Safety beam sensor


