S07bb-F 450/750V Cable S07bb-F 4G1, 5 Round Acs Rubber-Sheathed Cables for Drinking Water

Features

Conductor  Plain copper, finely stranded class 5 in accordance with DIN EN 60228 / IEC 60228
Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber)
Color code up to 5 cores: colored in accordance with DIN VDE 0293-308 more than 5 cores: DIN EN 50525-1 Annex D
Outer sheath EPR special compound type EM6 according to DIN EN 50363-2-1;
water resistant; Compound 3G357 Outer Sheath Colour Blue Electrical parameters
Rated voltage 450/750V Max. permissible
Operating voltage AC 0.476/0.825 kV Max. permissible operating voltage DC 0.619/1.238 kV AC Test Voltage 2.5 kV (15 Min.)
Chemical parameters Compatibility to drinking water ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany ACS - France Water resistance DIN EN 50525-2-21
Thermal parameters Max. permissible temperature at conductor 90 °C Max. short circuit temperature of the conductor 250 °C Max.
Permissible water temperature 60 °C (At higher water temperatures, a shortened cable service life is to be expected) Ambient temperature for fix Installation min. -50 °C Ambient temp. in fully flex. operation min. -50 °C

S07BBH2-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the "Elastomerleitlinien (ELL)" of the German "Umwelt Bundesamt" and the Attestation de Conformité Sanitaire (ACS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. For protected, fixed installation within equipment, pipes or wells, as well as for rotor connections, these cables may be operated with an AC voltage to 1000 V or a DC voltage to 750 V with respect to earth. The permissible AC voltage for motor tests is 3 kV for a maximum duration of 3 minutes. In other respects the specifications of DIN EN 50565-2 apply. Global data Brand REPS Type designation S07BBH2-F Model Flat Standard DIN EN 50525-2-21 Notes on installation Maximum Submersing Depth 2000 Meter.