S11-M-10kv 30kVA Oil-Immersed Three-Phase Two-Winding Fully Sealed Distribution Transformer

Note:Gnec is a shareholder of Ningbo transformer and is responsible for the overseas promotion of the "NB" brand.

Transformer Adavantage
1 - Low loss, low noise, low partial discharge, low temperature rise and energy-saving
2 - Adopt the latest insulatoin structure
3 - Excellent anti-short-circuit ability.
4 - As to the heat dissipating element adopts corrugated sheet or sheet radiator and other components.
5 - The iron core adopts high quality cold rolled graind oriented silicon steel sheet ,it is low loss and small magnetostriction.The whole iron core adopts the structure of 45-degree full oblique joint and round cross-section, which will not be loosened due to vibration during transportation and operation.

Basic Structure
The oil-immersed transformer mainly consists of core, windings, oil tank, insulation bushings, radiators and other components. The core is usually made of laminated silicon steel sheets to reduce eddy current losses. The windings are wound with copper or aluminum wires and achieve voltage transformation through the principle of electromagnetic induction. The oil tank is used to hold the transformer oil, which plays the roles of insulation, cooling and heat dissipation.

Working Principle
It is based on the law of electromagnetic induction, and changes the magnitude of AC voltage through the turns ratio of the primary winding and the secondary winding. When the primary winding is connected to an AC power source, an alternating magnetic flux is generated in the core, thereby inducing a corresponding voltage in the secondary winding.