Audited Supplier
S1BN8-F Cable
Insulated
Stranded
Festoon Applications
Bare Copper
CPE
Epr
Round Wire
Frequency Converter Controlled AC Drive
ISO9001, CE, RoHS
Aein
AEIN
Optional
Multicore
Shanghai
8544492100
Product Description
S1BN8-F Cable for Connection of Electrical Equipment in Contaminated Water| Item | S1BN8-F Cable |
| Conductor | Plain copper |
| Insulation | EPR |
| Outer Sheath | CPE |
| Nominal Voltage | 600/1000V |
| Test voltage | 3500 V |
| Temperature Range | Ambient temperature for fix installation min. -40 °C Ambient temp. in fully flex. operation min. -25 °C |
| Color | Orange |
| Certification | CE |
| Application | TECWATER rubber-sheathed cables S1BN8-F are intended for connection of electrical equipment in contaminated water and for medium mechanical stresses. Due to the various substances in the contaminated water, the cables may be used only in easily accessible areas that can be inspected (installation depth of approx. 10 m, as normally used in sewage water tanks). These cables are also suitable for use in process water, cooling water, mine surface water, rainwater and combined waste water. They further can be used in groundwater and seawater; less stringent specifications in terms of accessibility and inspection can be imposed (in such cases the cables can be used at depths up to 2000 m). Water types are defined in accordance with DIN 4045 and DIN 4046. If the water concerned is aggressive or composed of special substances, the cable's resistance properties should be examined. These cables can be used indoors, outdoors, in explosion-hazard areas to DIN VDE 0165, in fire-hazard locations, on construction sites in accordance with DIN VDE 0100 Part 704, in open-cast mining and in quarries in accordance with DIN VDE 0168, in industry and in agriculture. They can also be permanently installed, e.g. on plaster, on excavators or on hoisting gear. |
