Audited Supplier
R5
DIN
Low Carbon Steel
Female
Zinc Plated
Round
CNC Machine
> 72 Hours
Available
Available
500PCS
25 Days for Normal Order
JJR
Carton or as Request
1/4"-2"
Tianjin
7307990000
Product Description
SAE 100 R5 carbon steel reusable hose tail
The reusable insert is an excellent choice for emergency repairs. Assembly can be accomplished with hand wrenches; there is no crimper required. Reusable hose fittings meet the same performance requirements as permanently attached crimp fittings.
Hydraulic systems create a lot of pressure in the hoses and fittings moving hydraulic fluid through the system. The weak spot in the system rests in improperly installed fittings. Crimped fitting support the pressure created by the hydraulic fluid but once they are installed, they cannot be reused. Reusable hydraulic fitting secure to the end of a hydraulic line and will not break under pressure when properly installed.
Straight
| Part No. | Thread E | Dash | Dimension | |||
| A | C | S1 | S2 | |||
| 26718D-04-04 | 7/16"×20 | 04 | 22 | 9 | 14 | 17 |
| 26718D-05-05 | 1/2" ×20 | 05 | 25.4 | 9.5 | 14 | 17 |
| 26718D-06-06 | 9/16"×18 | 06 | 24.5 | 10.5 | 17 | 19 |
| 26718D-08-08 | 3/4"×16 | 08 | 31.5 | 11 | 22 | 24 |
| 26718D-10-10 | 7/8"×14 | 10 | 34 | 13 | 27 | 27 |
| 26718D-12-12 | 1.1/16"×12 | 12 | 37 | 15 | 32 | 32 |
| 26718D-16-16 | 1.5/16"×12 | 16 | 33.5 | 16 | 38 | 41 |
| 26718D-20-20W | 1.5/8"×12 | 20 | 41.5 | 17 | 41 | 50 |
| 26718D-24-24W | 1.7/8"×12 | 24 | 43 | 20 | 46 | 55 |
| 26718D-32-32W | 2.1/2"×12 | 32 | 45.5 | 23.5 | 65 | 75 |
Elbow
| Part No. | Thread E | Dash | Dimension | ||||
| A | C | H | S1 | S2 | |||
| 26798D-04-04 | 7/16"×20 | 04 | 38.5 | 9 | 33.5 | 14 | 15 |
| 26798D-05-05 | 1/2" ×20 | 05 | 43.4 | 9.5 | 37 | 14 | 17 |
| 26798D-06-06 | 9/16"×18 | 06 | 44.8 | 10.5 | 39.3 | 17 | 19 |
| 26798D-08-08 | 3/4"×16 | 08 | 53 | 11 | 47.5 | 19 | 24 |
| 26798D-10-10 | 7/8"×14 | 10 | 66.5 | 13 | 52.5 | 24 | 27 |
| 26798D-12-12 | 1.1/16"×12 | 12 | 79.5 | 15 | 63.5 | 27 | 32 |
| 26798D-16-16 | 1.5/16"×12 | 16 | 86.5 | 16 | 70 | 32 | 41 |
| 26798D-20-20W | 1.5/8"×12 | 20 | 100.5 | 17 | 85 | 38 | 50 |
| 26798D-24-24W | 1.7/8"×12 | 24 | 121 | 20 | 97.5 | 46 | 55 |
| 26798D-32-32W | 2.1/2"×12 | 32 | 143.3 | 23.5 | 118.8 | 60 | 75 |
Packing in box
Assembly
How to install the reusable hose end
Clamp a reusable hose end socket into the jaws of a bench vice.
Insert one end of a hydraulic hose into the fitting secured in the vice. Turn the hose counterclockwise to thread it into the socket. Continue turning until the hose bottoms out in the fitting.
Lubricate the mandrel assemble of the reusable hydraulic fitting with clean hydraulic fluid. Slide the mandrel in and out of the socket and into the end of the hydraulic hose to lubricate the inside of the connection.
Push the mandrel into the socket until the threads of the assembly meet the front edge of the socket. Turn the nipple nut clockwise to thread the mandrel into the socket with an adjustable wrench. Stop turning the nut when there is a 1/32 to 1/16 inch gap between the front edge of the mandrel assembly and the front face of the socket.
Hold the front nipple nut steady with an adjustable wrench. Turn the rear mandrel nut counterclockwise with a second adjustable wrench to complete the assembly.
We carries a wide variety of hydraulic hose ferrule fittings in common size,used mainly for crimping hose fittings.More other type ferrule,fitting and hose please feel free to contact with us.
