Audited Supplier
Model | KW | HP | Capacity | Pressure | Dimension (mm) | Weight | Size |
SCR25APM-7 | 18.5 | 25 | 2.8 | 7 | 1200*800*1100 | 400 | Rc1 |
SCR25APM-8 | 2.79 | 8 | |||||
SCR25APM-10 | 2.49 | 10 | |||||
SCR30APM-7 | 22 | 30 | 3.7 | 7 | 1200*800*1100 | 400 | Rc1 |
SCR30APM-8 | 3.6 | 8 | |||||
SCR30APM-10 | 3.0 | 10 | |||||
SCR40APM-7 | 30 | 40 | 5.2 | 7 | 1200*800*1100 | 500 | Rc1 |
SCR40APM-8 | 5.0 | 8 | |||||
SCR40APM-10 | 4.4 | 10 | |||||
SCR50APM-7 | 37 | 50 | 6.5 | 7 | 1300*900*1270 | 620 | Rc1 1/2 |
SCR50APM-8 | 6.3 | 8 | |||||
SCR50APM-10 | 5.8 | 10 | |||||
SCR60APM-7 | 45 | 60 | 8.1 | 7 | 1300*950*1370 | 680 | Rc1 1/2 |
SCR60APM-8 | 8.0 | 8 | |||||
SCR60APM-10 | 7.0 | 10 | |||||
SCR75APM-7 | 55 | 75 | 10.4 | 7 | 1800*1200*1550 | 1160 | Rc2 |
SCR75APM-8 | 10.1 | 8 | |||||
SCR75APM-10 | 8.5 | 10 | |||||
SCR100APM-7 | 75 | 100 | 13.3 | 7 | 1800*1200*1550 | 1230 | Rc2 |
SCR100APM-8 | 13.6 | 8 | |||||
SCR100APM-10 | 11.8 | 10 | |||||
Note: The capacity is measured as GB3853 standard.(equivalent to ISO1217 Annex C) Standard voltage is 380V/50HZ/3P, other voltage is available. The recommended best capacity range is 60%-100%. Alpine/high altitude, high temperature, high huidity, high dust loads or other adverse working conditions will require specialized custom designs. These are available on special request. We reserve the right to make changes and improvements to the design and appearance. Specifications may change without prior notice. | |||||||
Down-to-earth investment for the future
What's important is not initial cost but life cycle cost . INVERTER compressrs may look more expensive than fixed speed
model,but many customers choose them because they know importance of life cycle cost & return on investment when
it comes tochoosing compressors.
What you pay should be only for what you use
SCR compressor can adjust compressor's rotating speed depends on the demand of factory load which changes from moment to
moment by own developed algorithm. Thus, it can provide exact volume and pressure what customer needs and achieve maximum
energy saving. Achieve an energy-saving effect under any load operation through wide-range inverter control, wide-range control,
and e-STOP function.
Special Dual Housing Oil Cooling Motor
Permanent Magnet motor adopt dual housing design with IP65 protection grade, there have space left for oil channel between the
inner housing and outer housing. It take use of compressor itself lubricant system to cool down motor circularly through its oil
channel,no touch with outside cooling air, and more suitable for the dusty environment, It break through the traditional air cooling
motor disadvantage with IP23 or IP54 protection grade.
Special morse connection
PM motor rotor is directly mounted on the airend shaft, No gears or belts, no coupling, Zero transmission loss, Easy for installation,
No need to make adjustment, Better protection for inner parts of PM motor. There's no bearing for the PM motor, so motor is 100%
free maintenance, Reduce maintenance cost.
Double Frequency conversion system
Constant pressure output: A significant energy-saving effect can be achieved by constant pressure control Pressure fluctuation
can be controlled within 0.01MPa.
Constant temperature output: Normally the temperature is set at 81,ensure the best lubrication performances while avoid the
sudden stop caused by haigh temperature.
