Audited Supplier
Product Details
LQ-180 Wheeled Rotary Drilling Rig Introduction
1. Product Overview
The LQ-180 wheeled rotary drilling rig is a highly efficient and flexible foundation construction machine, primarily used for drilling operations in buildings, bridges, railways, highways, and other foundation engineering projects. With its wheeled chassis, it offers excellent mobility and rapid transfer capabilities, making it suitable for urban construction and complex geological conditions.The drilling rig is equipped with a four-drive power transmission system and a hydraulic expansion center of gravity. The upper body can be rotated 180 degrees stably,which increases the working range and area. The maximum drill rod depth of the drilling rig can reach 20 meters, and the drilling diameter is 500-1800MM
2. Main Features
High Mobility
- Equipped with a wheeled chassis for fast movement and frequent site transfers.
- Flexible steering to adapt to narrow construction sites.
Powerful Drilling Performance
- High-torque power head for drilling in hard rock, sand, gravel, and other complex geological conditions.
- Efficient hydraulic system ensures smooth and effective drilling operations.
Eco-Friendly and Energy-Saving Design
- Low-emission engine that meets environmental standards while reducing fuel consumption.
- Noise-reduction design minimizes construction site noise pollution.
LQR180 wheel rotary drilling rig parameters | |||||
Model | LQ180-11 | LQ180-13 | LQ180-15 | LQ180-18 | LQ180-20 |
Working mode | Hydraulic cylinder pressurization | ||||
Drilling depth | 10m | 12m | 14m | 17m | 19m |
Maximum drilling diameter | 500-1500mm | ||||
Form factor(m) | 7.50*2.20*3.10 | 8.50*2.20*3.10 | 9.50*2.20*3.10 | 8.50*2.20*3.45 | 9.50*2.20*3.45 |
Total weight | 7.5T | 8T | 8.5T | 9T | 9.5T |
motor | Model | YUNNEI | |||
power | 88KW | ||||
rotate speed | 2200r/min | ||||
chassis | Speed | 50km/h | |||
Maximum climbing slope | 30% | ||||
Gearbox Model | 145 | ||||
width | 2100mm | ||||
tyre | 900-20 | ||||
Tire distance | 2950mm | ||||
direction | hydraulic pressure | ||||
Power head torque | 17kn/m | ||||
Power head speed | 5-20r/min | ||||
Wire rope diameter | 16mm | ||||
Swing angle | 180° | ||||
Travel drive | Rear-wheel drive or four-wheel drive | ||||
working pressure | 22mpa | ||||
Machine Photos
Exhibition
Customer photo
Working photo
| 1.Q: Are you a manufacturer? |
| A: Yes, we are a professional rotary drilling rig manufacturer. |
| 2.Q: What does your company produce? |
| A: The main products of our company include rotary drilling rig. |
| 3.Q: How about your delivery time? |
| A: Normally the delivery time is about 7-15 days. For some specialcase, we can make it within 2 weeks, it depends on different products. |
| 4.Q: What methods of payment do you accept? |
| A: We accept T/T, L/C. |
| 5.Q: Do you offer any deals or discounts? |
| A: Yes, price depends on different quantity, different quantity will give you different price |
