Audited Supplier
The Samsung SM471 is a high-speed chip mounter equipped with 10 axes for each mount head and dual-boom,
high-performance newer flying camera placement machine that delivers world-class top speeds of 75,000 CPH .
0402Chip ~ 14mm can be basically corresponding, and through the application of high-speed.
High-precision electric feeder, improve the actual productivity and placement quality.
SM471 parameters
Number of shafts: 10 shafts * 2 cantilever
Mounting Speed: 78000CPH (Optimal Conditions)
Mounting accuracy: CHIP 50
Component Size: 0402, BGA, CSP (Ball Pitch 0.4mm)
2. Product parameters:
| Specifications | SAMSUNG SMT Pick and Place Machine |
| Alignment | Flying Vision |
| Number of Spindles | 10 Spindles x 2 Gantry |
| Placement Speed | 78,000 CPH(Optimum) |
| Placement Accuracy | ±50um@+3sigma (Based on the Standard Chips) |
| Component Range | Chip 0402 ~ 14mm(H 12mm) IC, Connector(Lead Pitch 0.4mm) BGA, CSP(Ball Pitch 0.4mm) |
| Board Dimension(mm) | 50(L) x 40(W)~510(L) x 460(W)610(L) x 460(W)(Option) |
| Feeder Capacity | 120ea / 112ea(Docking Cart) (Based on 8mm) |
| Power | AC200 / 208 / 220 / 240 / 380 / 415V (50/60Hz, 3Phase)Max. 5.0kVA |
| Air Consumption | 0.5 ~ 0.7MPa(5 ~ 7kgf/cm2) |
| Mass | Approx. 1,820kg |
| External Dimension(mm) | 1,650(L) x 1,690(D) x 1,485(H) |
Maintenance and repair(1) High temperature
The machine is easy to malfunction in the high temperature environmentthus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention tomaintenance and micro-repair, these mechanical failure control.
(2) Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, inaddition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.
(3) Professional maintenance
Equipment professional electrical maintenance personnel, regularmaintenance and repair of machinery. Can also be under the guidancof manufacturers to do a good job in the daily maintenance and regulamaintenance of machinery.
FAQ:
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
