Audited Supplier
TH
Power Element
Brass, Steel
Conduct Electricity, Transmission of Electrical Signals
Other
Spacer for SMT
CNC Lathe
Other
Pin
RoHS, SGS
in-Sail
Tin Plated
In-saiL
Blister Box Packaging+Carton
Shenzhen China
Product Description
Factory Direct Sales
More than 10,000 specifications of fasteners available. Fast delivery, One-stop solutions. Annual Customer praise rate exceeds 98%.
Efficient Productivity
Technical support within a half-hour, Standard product lead-time around 1-2 weeks.And provide online service 24 hours a day.
Reliability
We always insist on integrity and responsibility, constantly innovative quality products, make our product more competitive.
Single-piece Power Elements are used for the supply and distribution of high
currents in connection with circuit board based systems. Depending on the pin
arrangement and the layout, currents of up to 1,000A are possible. Meanwhile
this product group has been successfully used in the field in thousands of
various designs. The manufacturing method allows individual adaptions
regarding design and dimensions. That is the reason why Power Elements
perfectly qualify as connecting element for fuses, IGBTs, switches and cables
to the circuit board or as contact element for board-to-board respectively boardto-
case.
Application Possibilities
• Board-to-board over 90°o r packaging
• Wire-to-board screw connection of ring terminals
• Electro mechanics such as hinges and case mounting
• Spacers
• Retainers / fastenings of switches, fuses, IGBTs
• Any combination of all these and much more
Processing
In-saiL PowerOne Power Elements are pressed in into the circuit board.
Soldering is not necessary. Therefore, the PCBs are not exposed to
temperature stress. This processing step easily blends in to the processing
chain and is highly cost efficient. With the aid of the corresponding Press Fit
tools, several Power Elements can be pressed in simultaneously.
• For assembling prototypes, no special equipment is needed for pressing in,
a simple toggle press is sufficient.
• The circuit board needs support during the pressing procedure.
• The pressing force must be executed in a 90° angle to the circuit board.
• After the pressing process the pins should stand out of the drilled hole (ca. 0.2
- 0.5 mm).
• Plated through holes of the circuit board must be executed according to our
indications.
• PowerOne high current terminal blocks and spacers are manufactured for
pressing, soldering is not intended.
currents in connection with circuit board based systems. Depending on the pin
arrangement and the layout, currents of up to 1,000A are possible. Meanwhile
this product group has been successfully used in the field in thousands of
various designs. The manufacturing method allows individual adaptions
regarding design and dimensions. That is the reason why Power Elements
perfectly qualify as connecting element for fuses, IGBTs, switches and cables
to the circuit board or as contact element for board-to-board respectively boardto-
case.
Application Possibilities
• Board-to-board over 90°o r packaging
• Wire-to-board screw connection of ring terminals
• Electro mechanics such as hinges and case mounting
• Spacers
• Retainers / fastenings of switches, fuses, IGBTs
• Any combination of all these and much more
Processing
In-saiL PowerOne Power Elements are pressed in into the circuit board.
Soldering is not necessary. Therefore, the PCBs are not exposed to
temperature stress. This processing step easily blends in to the processing
chain and is highly cost efficient. With the aid of the corresponding Press Fit
tools, several Power Elements can be pressed in simultaneously.
• For assembling prototypes, no special equipment is needed for pressing in,
a simple toggle press is sufficient.
• The circuit board needs support during the pressing procedure.
• The pressing force must be executed in a 90° angle to the circuit board.
• After the pressing process the pins should stand out of the drilled hole (ca. 0.2
- 0.5 mm).
• Plated through holes of the circuit board must be executed according to our
indications.
• PowerOne high current terminal blocks and spacers are manufactured for
pressing, soldering is not intended.
