Audited Supplier
Flat
Flat Tempered
GB/T 9963-1998
Tempered Glass
1.1mm 2.2mm
Ⅱ
Conforming Article
Laborary
Gorilla Glass/AGC Glass/Other Brand Glass
0.5mm, 0.7mm, 1.1mm, 2mm etc.
20X20mm, 50X50mm, 100X100mm or Customized
Squre, Rectangular, Irregular
10-60 Ohm, 60-150 Ohm, 150-500 Ohm
SAIDA GLASS
customized
China
7007190000
Product Description
Conductive Glass Sheet for Lab.
Electronic Level/High Precision/Super Flatness
Available with Mulitiple Process
Parameter Information
Product Name: | ITO coated glass substrate, ITO conductive glass slide |
Standard Size (Length × width): | 1" x 3" (25.4x76.2 mm), 1" x 1" (25.4x25.4 mm), 10 x 10 mm, 50 x 50 mm, 100 x 100 mm, 300 x 300 mm (Or specific size can be customized) |
Standard Thickness: | 0.5mm, 0.7mm, 1.1mm, 2.0mm or 3.0mm (other thickness can be customized.) |
Resistance : | 4~5 ohm/sq, 6~8 ohm/sq,10~15 ohm/sq,20~30 ohm/sq, 30~40 ohm/sq, 60~80 ohm/sq, 80~100 ohm/sq, 300~500 ohm/sq, or others |
Transmittance: | ≥87% (at 550nm wave length) |
ITO thin Film thickness: | 185nm ( 6~8 ohm/sq); 135nm ( 10~15 ohm/sq) |
Glass substrate | soda-lime glass |
Application: | Mobile phone screens, PDAs, calculators, electronic watches, electromagnetic shielding, photocatalysis, solar cells, biological experiments, major university laboratories and other new scientific and technological fields; |
Product Introduction
ITO Conductive Glass
1. ITO conductive glass is manufactured by depositing silicon dioxide (SiO2) and indium tin oxide (commonly referred to as ITO) thin films on the basis of soda-lime or borosilicate glass by using a magnetron measurement method. 2. ITO is a metal compound with good transparent and conductive properties. It has the characteristics of forbidden bandwidth, high light transmittance and low resistivity in the visible spectrum region. It is widely used in affirmative display devices, solar cells, and special functional window coatings. Laboratory equipment and other optoelectronic devices.
FTO Conductive Glass
1. FTO conductive glass is fluorine-doped SnO2 transparent conductive glass (SnO2: F), referred to as FTO. 2. SnO2 is a wide band-gap oxide semiconductor that is transparent to visible light, with a band gap of 3.7-4.0eV, and has a regular tetrahedral gold red structure. After being doped with fluorine, the SnO2 film has the advantages of good light transmittance to visible light, large ultraviolet absorption coefficient, low resistivity, stable chemical properties, and strong resistance to acid and alkali at room temperature.
3. If you store for a long time, you must pay attention to moisture, the humidity should be below 65%, so as not to affect the resistance and transmittance of the glass.
Product pictures
How to use and store conductive glass
1. When taking and putting it down, it can only touch the four sides, not the conductive glass ITO surface;
2. Handle with care, not collide with other fixtures and machines;3. If you store for a long time, you must pay attention to moisture, the humidity should be below 65%, so as not to affect the resistance and transmittance of the glass.
4. The glass should be placed vertically, and the stacking between the glasses should not exceed two layers.
Product pictures
Edge & Angle & Shape Work
Our other glass panels applications:
Our company:
Saida Glass Co.,Ltd is specialized in the manufacture and export of glass deep-processing for 10 years.
We have total three factories, one is located in Dongguan city, one is in Heyuan city and our new factory (as below picture showing) is in Henan province which is in building now and will start to production this June.
Our advantage products are cover glass for touch screen, industrial touch devices, smart equipment, home appliance etc, and glass panel for lighting, touch switch panel, and AR/AG/AF coating glass.
Other glass products as car mirror, ceramic glass, borosilicate glass, fused silica quartz glass, ITO/FTO glass etc.
Packaging
FAQ
* What shall I provide to get a quotation?
1. The kind of glass you want and its usage.
2. Drawings will be better.
3. Requirements in details.
4. Order quantity.
5. Others you think necessary.
* How to order?
1. Contact our sales with detailed requirements/drawings/quantities, or just an idea or a sketch.
2. We check internally to see if it's producible, then provide suggestions and make samples for your approval.
3. Email us your official order, and send deposit.
4. We put the order into mass production schedule, and produce it as per the approved samples.
5. Process balance payment and advise us your opinion on safe delivery.
6. Enjoy.
* Can I visit your factory? Where is it?
Welcome. Our factories are located in Dongguan China,near to Shenzhen and Guangzhou city, please let us know when you will come and how many people, we will advise route guidance in details.
