Audited Supplier
PJ3600
12
3600
2 Layers
7.5kw
12rpm
Parallel Shaft Helical Gear Reducer
HEXIANG
Wooden Case by Sea Transport
3600 Model
China
8474390000
Product Description
Product use
This equipment is mainly used to stir slip in the ceramic industry, so that the solid particles stored in the slip pool will not precipitate. After the rotating mixing process of the stirring blade, the slip is kept uniformly suspended to achieve the purpose of aging or mixing.
Main structure
1. The flat vane agitator is composed of parallel shaft helical gear reducer, reducer base, coupling, bearing base, base plate, connecting shaft, mixing shaft, mixing blade and bottom fixing base.
2. Agitating pool
3. Electric control system: It is composed of electric control cabinet and control mechanism, external main switch, operation button, indicator light and corresponding instrument.
| No. | Item | Flat agitator | ||||||
| Type | PJ-1450 | PJ-2000 | PJ-2700 | PJ-3300 | PJ-3600 | PJ-4500 | PJ-5000 | |
| 1 | Reducer type | MPF89-Y2.2-4P-0º-109.49-M4 | MPF99-Y3-4P-0°-102.16-M4 | MPF109-Y4-4P-0º-101.38-M4 | MPF99-Y5.5-4P-0º-117.94-M4 | MPF109-Y5.5-4P-0º-117.94-M4 | MPF129-Y7.5-4P-0º-126.36-M4 | MPF159-Y11-4P-180°-162.96-M4 |
| 2 | power(KW) | 2.2 | 3 | 4 | 5.5 | 7.5 | 7.5 | 11 |
| 3 | Stirring shaft speed(r/min) | 13 | 14 | 14 | 12 | 12 | 11 | 9 |
| 4 | Total equipment weight(Kg) | 140 | 340 | 412 | 427 | 436 | 700 | 874 |
| 5 | Floor space size(mm) | 570×600×1000 | 700×700×1050 | 800×800×1250 | 800×800×1200 | 800×800×1250 | 800×800×1500 | 800×800×1500 |
| 6 | Octagonal slip pool size(φ) | φ2000×1500 | φ2500×2100 | φ3100×2900 | φ3600×3300 | φ4100×3300 | φ5000×4000 | φ5500×3850 |
| 7 | Rotation diameter of agitating blade(mm) | 1450 | 2000 | 2700 | 3300 | 3600 | 4500 | 5000 |
| 8 | agitating vane layer | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| 9 | Slip density in pool(Kg/L) | 1.7-1.8 | 1.7-1.8 | 1.7-1.8 | 1.7-1.8 | 1.7-1.8 | 1.7-1.8 | 1.7-1.8 |
| 10 | Embedded plate size(mm) | none | 280×280 | 280×280 | 280×280 | 280×280 | 280×280 | 315×315 |
| 11 | Embedded bolt size(mm) | M16×220 | M20×300 | M20×300 | M20×300 | M20×300 | M20×300 | T M30×280 |
| 12 | Base center circle diameter(mm) | φ350 | φ500 | φ550 | φ550 | φ550 | φ600 | φ820 |
- The agitating pool is equipped with a stirring device, and the slip stored in the pool continuously rotates and rolls through the rotation of the stirring blade inside the pool, so that the slip is always in a suspended state in the pool to ensure the uniformity of the slip;
- The motor is decelerated by the reducer to transmit the power to the double-layer stirring blade via the coupling and the stirring shaft, so that the stirring blade stirs the slip at a speed of 10.5-14 revolutions per minute. The whole body is installed on the slip pool and fixed by bolts. In order to prevent the rotation of the stirring system, the bottom shaft end of the stirring shaft adopts a radial support to ensure its working stability.
- The stirring blade is installed on the stirring shaft with bolts.
- The rotating support part adopts two sets of deep groove ball bearings and one set of thrust ball bearings to ensure the stability and reliability of the entire agitating system.
