Audited Supplier
Main features:
*174PSI/12bar/1200kPa Output pressure
*Fit for almost any size automotive service facility
*Auto-Start Inflation
*Fully Automated, fully programmable, micro-processor controlled conversion system
*Self-diagnostic features
*Suit for: Car, Light Truck, Bus
Technical Parameters:
Dimensions (Height*Width*Depth) | 1260mm*360mm*360mm |
Net Weight | 17.5kg/38.6lbs |
Gross Weight | 21kg/44.6lbs |
Packing Size (Height*width*Depth) | 200mm*1290mm*360mm |
Power Requirement | 100-240Vac 50/60HZ |
Power Consumption | 23VA |
Operating Temperature Range | -20ºC/-4ºF to 70ºC /158ºF |
Max Inlet Air/ Nitrogen Supply | 217PSI/ 15bar /1500kPa |
Operating Range | 5-174PSI/0.3-12bar/35-1200kPa |
Accuracy | ±1PSI/0.07bar / 7kPa |
Resolution | 1PSI/ 0.1bar /5kPa |
Units of Measurement | PSI/ bar / kPa |
Specifications:
1.Auto-Start inflation
2.Automatic zero drift adjustment
3.Remain at last setting
4.Comprehensive diagnostics and error reporting
5.Audible and visual end of the cycle signal indicators
6.Large backlight LCD display
7.Vandal resistant mechanical switches
8.Suits Standard nitrogen bottle/ Direct nitrogen supply from generator/Air compressor
9.1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck
Operation Steps:
1. Set final target pressure using the +and -buttons.The LCD screen will show the target pressure.
2. Connect air hose to tire valve stem
3. Push the "FILL" button once
4. When unit "beeps" and the LCD screen flashes the target pressure, tire inflation is complete
5. Immediately remove hose
Why choose us?
About US
The company's business focuses on various scenarios of energy end use, from planning and construction of energy consumption stations to equipment manufacturing, from installation and operation and maintenance to intelligent control and management, from construction of the entire station to value-added services, the company plows into the industry value chain, forming a one-stop industry solutions.
Our Factory
Product Family
Successful customer cases
FAQ
Q1: Are you a trading company or a manufacturer? Where is your company located?
√ We are factory. Our company is located in Beijing, China.
Q2: Can I visit your company?
√ Welcome to visit our factory and it is a great pleasure for us.
Q3: OEM or ODM accepted?
√ Yes, we can do OEM & ODM, the logo on the light or package are available.
Q4: What certificate do you have?
√ We have the certifications ISO9001, ISO14001, NMI, ANZEx, OIML01, etc.
Q5: How can I get more details of the deal?
√ Write down all your questions. And click send, we will reply you by mail within 24 hours.
√ We seek cooperation with overseas agents, if you have intentions, please contact us.
