Audited Supplier
38891-59-7
C15h16o2 C2h7on C3h5ocl
210-898-8
Structural Adhesive
Solid-State
Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
Epoxy Resin+Hardener
Rubber Polymer Synthetic Adhesive
Epoxy Resin
Strong Adhesion
Epoxy Resin
Red
ISO9001
a+B Component Mixed
Top-Quality
SANVO
Container
34cm*7cm*7cm
China
Product Description
Products Description
Product Paramenters
Details Images
Product Features
Applications
Installation Instructions
Company Profile
| Product Name | SANVO MD600 Epoxy Chemical Anchor |
| Description | SANVO MD600 Epoxy Mortar is a new type of building structural adhesive. It is two-component injection epoxy adhesive, which is mainly composed of modified epoxy resin and Nano materials. It is known as epoxy planting glue due to its anchoring roots of materials such as steel bars and bolts. |
| Features | 1.No expansion stress, strong toughness 2.Resist to acid and alkali 3.Mixed uniformity, stable performance 4.Convenient construction, save hours, high utilization, low integrated cost |
| Main Component | Epoxy Reinforcement Adhesive is a two-component epoxy adhesive. It is mainly composed of modified epoxy resin and amine curing agent, adding fillers (quartz sand, calcium carbonate, etc.) and additives to form components A and B. |
| Recommend Use | It is suitable for the decoration of various indoor and outdoor occasions, such as pasting fireproof boards, plywood, desktop boards, furniture, wood and other wooden products; in addition, it can also be used for pasting other materials, such as aluminum-plastic panels, metal, rubber and leather products. |
| Restrictions | It is forbidden to paste expanded polystyrene, plasticized polyvinyl chloride and some artificial leather. |
| Appearance | Stable Color |
| Shelf Time | 12 months |
| Fineness | ≤ 80 | Completely Solid Curing Time (25 ° C) | 24 ~ 48 hours |
| B Glue Viscosity(MPa.s) | 16000 ± 1000 | Split Tensile Strength | ≥ 8.5MPa |
| Effective Construction Time (25 ° C) | 40 ~ 60 minutes | Anti-bending Strength | ≥ 50 Mpa |
| Initial Curing Time (25 ° C) | 3 to 4 hours | Pressure Resistance Strength | ≥ 60 Mpa |
| Steel to Steel Tensile Shear Strength (Standard Conditions) | ≥10MPa | Binding Strength (C30, φ25, L = 150) | ≥ 11 MPa Under Constrained Pulling Conditions. |
| Binding Strength of Ribbed and Concrete (C60, φ25, L = 125) under Constrained Draw Conditions (C60, φ25, L = 125) | ≥17 Mpa | Steel Steel T Impact Peeling Length | ≤25mm |
| Thermal Deformation Temperature (0.45 MPa Bending Stress) | ≥ 65 ° C | No Volatile Content | ≥99% |
ApplicationsInstallation InstructionsCompany Profile
