Sas Fake 29p/E Non-Bumped Solder Type 180° Au15u'' Wire to Board Connector

I. Basic Information
Product Name: SAS fake 29P/E non-bumped solder type 180° Au15u'' Wire to Board Connector
Type: Wire-to-Board Connector (Wire-to-Board Connector)

Second, the main characteristics
1. Number of pins: 29P/E.
2. Non-bumped solder joints (Non-bumped Solder Type): indicates that the pins of the connector will not form a bumped solder joint when soldering, which helps to save space on the board and may improve the flatness and stability of the connection.
3. Solder Type: For 180 ° of the soldering method, may mean that the pin design allows the formation of 180 ° bend or connection angle when connecting.
4. Plating: Au15u'' Plated, i.e., the surface of the pin is plated with a 15 micro-inch (μ'') gold layer. The gold plating has good electrical conductivity, oxidation resistance and corrosion resistance, which helps to improve the electrical performance and long-term stability of the connector.

Third, the technical characteristics
High-quality materials: connectors may be made of high-quality copper alloy or other conductive materials to ensure good electrical performance and mechanical strength.
Surface gold plating: Gold plating treatment improves the corrosion resistance and conductivity of the connector, ensuring the stability and reliability of signal transmission.
Space optimization: Non-raised solder joints and compact design help save space on the board and may improve the density of the overall assembly.

IV. Application Areas
The connector is suitable for use in a variety of electronic devices that require wires or cables to be connected to the circuit board at a specific angle.
It may be widely used in communication equipment, computer equipment, consumer electronics, automotive electronics, etc., especially in applications requiring high space utilization and electrical performance.

V. Precautions
Be sure to verify the exact model number, specifications and compatibility information of the product before purchase and use.
Installation should follow the installation guidelines and procedures provided by the manufacturer to ensure proper installation and reliable connection of the connector.