Audited Supplier
HRS-26S/P
CE
L-Band Satellite Optical Receiver
L-Band Satellite
1260~1620nm; 1540~1563nm
47~862MHz; 950~2600MHz
>50dB; >51dB
<-65dB; <-63dB
<-63dB;<-53dB
RS232
3rd Part Certification
AITC
China
Product Description
HRS-26S/P
950~2600MHz
L-Band Satellite optical receiver
Product Description
AITC HRS-26S/P L-Band satellite receiver, adopting high-sensitivity PIN detector, receiving sensitivity is -22dBm, typical value: -13dBm. It can receive analogue and digital signal on satellite antenna LNB with the frequency of 950~2600MHz, It can be compatible with any FTTX PON to realize combination of Direct Broadcasting Satellite (DBS)with Internet and FTTH, it can also be used for L-Band uplink/downlink of satellite communication.
Product features
PIN detector, -22dBm receiving sensitivity, typical value: -13dBm.
950~2600MHz high bandwidth, suitable for SAT-IF application.
Receiving all L-BAND satellite signal of LNB over single fiber.
Different exterior structures. Suitable for FTTH, FTTP, FTTB, FTTC.
950~2600MHz
L-Band Satellite optical receiver
Product Description
AITC HRS-26S/P L-Band satellite receiver, adopting high-sensitivity PIN detector, receiving sensitivity is -22dBm, typical value: -13dBm. It can receive analogue and digital signal on satellite antenna LNB with the frequency of 950~2600MHz, It can be compatible with any FTTX PON to realize combination of Direct Broadcasting Satellite (DBS)with Internet and FTTH, it can also be used for L-Band uplink/downlink of satellite communication.
Product features
PIN detector, -22dBm receiving sensitivity, typical value: -13dBm.
950~2600MHz high bandwidth, suitable for SAT-IF application.
Receiving all L-BAND satellite signal of LNB over single fiber.
Different exterior structures. Suitable for FTTH, FTTP, FTTB, FTTC.
| Performance | Index | Supplement | ||||||
| Min. | Typ. | Max. | ||||||
| Optical feature | Operating wavelength | (nm) | 1260 | 1620 | HRS-26S/A-× × × -00 | |||
| 1540 | 1563 | HRS-26S/A-× × × -WD | ||||||
| Pass wavelength | (nm) | 1310/1490 | HRS-26S/A-× × × -WD | |||||
| Responsibility | R13 | (A/W) | 0.9 | 1310nm | ||||
| R15 | 0.95 | 1550nm | ||||||
| Receiving optical power | Typical | (dBm) | -13 | |||||
| Sensitivity | -22 | Pr | ||||||
| Overload | +3 | Po | ||||||
| Optical Receiving PD | PIN | |||||||
| Return loss | (dB) | 50 | ||||||
| Optical connector | SC/APC or LC/APC | |||||||
| IF feature | Operating bandwidth | (MHz) | 950 | 2600 | ||||
| Output level | (dBmV) | 10 | 30 | |||||
| Flatness | (dB) | -0.5 | +0.5 | 40MHz | ||||
| -1.0 | +1.0 | 950~2400MHz | ||||||
| Output return loss | (dB) | 12 | 950~2400MHz | |||||
| Channel loading | (CH) | 36 | QPSK or FM | |||||
| IM3 | (dB) | -65 | ||||||
| HUM | (dB) | -60 | ||||||
| IP1 | (dBm) | 18 | ||||||
| Output impedance | (Ω ) | 75 | Option 50Ω | |||||
| RF connector | F-female | 75Ω | ||||||
| SMA-F | 50Ω | |||||||
| General feature | SNMP interface | RJ45 | HRS-26S/P-113 | |||||
| Communication interface | RS232 | HRS-26S/P-113 | ||||||
| Power supply | AC | (V) | 90 | 220 | 265 | |||
| DC | -30 | -48 | -72 | |||||
| Power consume | (W) | 5 | Single PS | |||||
| Operating temp. | (º C) | -5 | +65 | |||||
| Storage temp. | (º C) | -40 | +85 | |||||
| Operating relative humidity | 5 | 95 | ||||||
| Size | (" ) | 19× 14.5× 1.75 | HRS-26S/P-113 | |||||
| (mm) | 59× 98× 23 | HRS-26S/P-213 | ||||||
| 117× 72× 29 | HRS-26S/P-313 | |||||||
| 150× 135× 98 | HRS-26S/P-913 | |||||||
