Audited Supplier
SC ZB
Power, Electronic, Lighting, Rectifier
Three
Core-type Transformer
Dry-type Transformer
Two-winding Transformer
ISO9001-2000, ISO9001, CCC
Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
Low Frequency
Ring
Bo Lian
Dyn11 Yyn0
2000kVA
Silicon Steel
0.4 Kv/10kv
Dry-Type Transformer
BO LIAN
Wooden Case or Pallet
according to the customization
China
Product Description
>"Product Features
Safe, flame retardant and fireproof, no pollution, can be installed directly in the load centre. Maintenance-free, easy installation, low comprehensive operating cost, low loss, good moisture-proof performance, can operate normally under 100% humidity, and can be put into operation without pre-drying after shutdown. Low local discharge, low noise, strong heat dissipation ability, can run at 150% rated load under forced air-cooled condition. Equipped with a perfect temperature protection control system, for the safe operation of the transformer to provide a reliable guarantee, high reliability. According to the operation research of more than 10000 sets of products which have been put into operation, the reliable performance index of the product reaches the international advanced level.
.
Safe, flame retardant and fireproof, no pollution, can be installed directly in the load centre. Maintenance-free, easy installation, low comprehensive operating cost, low loss, good moisture-proof performance, can operate normally under 100% humidity, and can be put into operation without pre-drying after shutdown. Low local discharge, low noise, strong heat dissipation ability, can run at 150% rated load under forced air-cooled condition. Equipped with a perfect temperature protection control system, for the safe operation of the transformer to provide a reliable guarantee, high reliability. According to the operation research of more than 10000 sets of products which have been put into operation, the reliable performance index of the product reaches the international advanced level.
.
| Transformer TypeTransformer | Resin Cast Dry Type |
Model | SCB10-50/10 |
| Number of Phase | Three Phase |
| Winding Type | Two Winding |
| Winding Material | Aluminum/Copper |
| Rated Capacity | 50kVA |
| High Voltage | 10/11kV |
| Low Voltage | 0.4kV |
| Tapping Ran | ±2x2.5% |
| Impedance Voltage | 4% |
| Load Loss (120°C) | 1kW |
| No-load Loss | 0.27kW |
| No-load Current | 2% |
| Frequency | 50/60Hz |
| Connection Group | Yyn0/Dyn11 |
| Cooling Method | ANAF |
| Insulation Class | F |
| Thermal Class | F1 |
| Operation Altitude | ≤1000m≤ 1000 m |
Technical Performance Parameters
- Number of phases: 3 phases
- Frequency: 50Hz
- Partial discharge: not more than 10pC
- Insulation heat-resistant grade: F grade
- Average temperature rise of winding: not more than 100K
- Noise level: Sound level in accordance with GB/T22072-2008
Transformer Type:
Rated Capacity: kVA
Phase: ( )Three Phase ( )Single Phase
Frequency: ( )50Hz ( )60Hz
Rated Voltage (HV/LV): kV / kV
Tapping Range: ± x %
Insulation Level: LI AC / LI AC
Vector Group: ( )Dyn11 ( )Yyn0 ( )Other
Short-circuit impedance: Uk= %
Service conditions: Altitude: m
Ambient temperature: ºC
Cooling Method: ( )ONAN ( )ONAF
Oil labeling:
Quantities ordered and time of delivery:
Other requires:
(If you have, It will be better send us technical specification/date documents.)
