Audited Supplier
XH
Iron
Stainless Steel
Axial Fan
DC
Ceiling Fan
ISO, CE, CCC, Appointed
2900r/M
4.4-90kw
89-402m³/H
5 Machine Number
256-8161 PA
Red/Yellow/Customized
Design and Technical Drawing Can Be Customized
2
380/660V
Kuang Feng
Strong Wooden Case Exporting Standard
Adjustable Aluminum Blades
China
8414599099
Product Description
MLFD series of underground mine fans local fan for mine ventilation
This product can be placed on the ground floor, or can be suspended in the roadway wall.
Through the fan gas dust content should not exceed 200mg / m³, gas concentration is less than 1%, when the gas concentration exceeds 1%, should immediately cut off the power.
When used on the floor, pay attention to the fan suction (collector side) can not be immersed in water or mud. The air temperature of the wind turbine is 20 ºC -40 ºC, the altitude should not exceed 1000m, the rated frequency of the power supply is 50HZ, the rated voltage is 380V, 660V or 380V / 660V any level.
XH-MLFD UsageKuangFeng fan type XH-MLFD underground mine fans is mainly used for underground down into the local fan, for mining face with a variety of local ventilation of the chamber occasions. At the same time, it is also applicable to local ventilation of other mines and various tunnel ventilation.
| Machine No. | Speed r/min | Total Pressure Pa | Volume m³/h | Motor | Weight KG | |
| Power KW | ||||||
| 4 | 2900 | 256-2050 | 136-89 | 2.2×2 | 270 | |
| 325-2500 | 150-100 | 3×2 | 288 | |||
| 375-3040 | 165-109 | 4×2 | 308 | |||
| 5 | 275-2060 | 217-145 | 4×2 | 420 | ||
| 325-2540 | 240-161 | 5.5×2 | 464 | |||
| 400-3155 | 266-178 | 7.5×2 | 472 | |||
| 5.6 | 275-2850 | 286-188 | 7.5×2 | 597 | ||
| 375-3690 | 324-215 | 11×2 | 691 | |||
| 440-4560 | 358-238 | 15×2 | 711 | |||
| 6.3 | 400-4775 | 410-237 | 15×2 | 832 | ||
| 460-5475 | 442-256 | 18.5×2 | 876 | |||
| 525-6125 | 468-274 | 22×2 | 932 | |||
| 640-7310 | 518-318 | 30×2 | 970 | |||
| 7.1 | 523-6228 | 608-352 | 30×2 | 1195 | ||
| 602-7163 | 652-377 | 37×2 | 1263 | |||
| 686-8161 | 696-402 | 45×2 | 1425 | |||
Ordering instructions
When ordering our underground mine fans, please specify the fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on.
The most important factors are volume and pressure.
Customized
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service
When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service
When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
Our company is located in Zhoucun District, Zibo City, Shandong Province. It is adjacent to Bolai Expressway in the east, Zhoucun urban area in the west, Jiqing Expressway in the north, and China National Highway 309. With convenient transportation and superior geography, our company covers an area of 10000 square meters and fixed assets of 50 million yuan.
The company was founded in 1993 and, after decades of development, has been able to produce over 200 series and over 1200 products, with an annual production capacity of 20 million. The products are widely used in industries such as boilers, workshops, mines, textiles, oil fields, chemicals, kilns, metallurgy, power plants, cement plants, alumina, electrolytic aluminum, building materials, etc. The mining fans, axial flow fans, cotton opening fans, and material conveying fans produced have been inspected by customs and commodity inspection departments and exported to Southeast Asia, Pakistan, Algeria, Kazakhstan, and other countries, deeply favored in the international market.
The company was founded in 1993 and, after decades of development, has been able to produce over 200 series and over 1200 products, with an annual production capacity of 20 million. The products are widely used in industries such as boilers, workshops, mines, textiles, oil fields, chemicals, kilns, metallurgy, power plants, cement plants, alumina, electrolytic aluminum, building materials, etc. The mining fans, axial flow fans, cotton opening fans, and material conveying fans produced have been inspected by customs and commodity inspection departments and exported to Southeast Asia, Pakistan, Algeria, Kazakhstan, and other countries, deeply favored in the international market.
1.Q: What parameters need to be provided when you design the industrial centrifugal fans?
A: Air flow rate(m3/h), Total pressure(Pa) or Static pressure(Pa), Inlet temperature(°C), Voltage and frequency on the working site.
2. Q:What is your delivery time?
A:15-35workdays, depending on the model of the fan.
3.Q:Are you manufacturer or trading company?
A:We are the professional manufacturer of centrifugal fans , over 30 years production experience and sales experience.
4.Q:What's your MOQ?
A:The MOQ is 1set,but larger quantity, lower price.
5.Q: What's your warranty?
A: 12 months after arrival of the goods on site.
6.Q:How do you control the product's quality?
A:All the products have quality testing and dynamic balance before delivery
